Intermatic IG2200-FMK Bedienungsanleitung

Lies die bedienungsanleitung für Intermatic IG2200-FMK (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 3 Bewertungen. Hast du eine Frage zu Intermatic IG2200-FMK oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Included in kit:

(1) Flush Mount Cover

(2) Mounting

Brackets

(8) #8-32

Serrated

Self-Tapping

Screws

IMPORTANT SAFETY INSTRUCTIONS • SAVE THESE INSTRUCTIONS

INSTALLATION INSTRUCTIONS

IG2200-FMK

Flush Mount Kit

Risk of Fire or Electric Shock

• For indoor installations only.

• Only use hardware included with flush mount kit for installation.

• Follow all instructions included with surge protective device being used with flush mount kit.

• To be installed and or serviced by qualified personnel.

• Disconnect power at service panel or disconnect switch(es) before installing or servicing.

• Installation and wiring must be in accordance with national and local code requirements.

• KEEP DOOR CLOSED AT ALL TIMES when not servicing.

WARNING

APPLICATION NOTES

1. Thoroughly read instructions before installing flush mount kit.

2. Instructions should be retained for future reference.

3. For use with IG2240-IMS, IG2240-IM and IG2280-IM models. (Figures below show IG2240-IM model)

4. For use with ½” paneling material. (Drywall, panel board, etc.)

5. Observe warnings and instructions on front panel and unit label of flush mount plate and SPD unit.

Attach ush mount plate to surge protective device (SPD).

1) Remove cover retaining screw. (Fig. 1)

2) Remove SPD cover by sliding cover up and off SPD

housing. (Fig. 2)

3) Attach both mounting brackets using four #8-32

serrated self-tapping screws included with kit. (Fig. 3)

Figure 3

Figure 2

Figure 1

Retaining screw

Produktspezifikationen