Inverto IDLB-QUDL24-MULTI-OPP Bedienungsanleitung
Inverto Nicht kategorisiert IDLB-QUDL24-MULTI-OPP
Lies die bedienungsanleitung für Inverto IDLB-QUDL24-MULTI-OPP (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 10 Bewertungen. Hast du eine Frage zu Inverto IDLB-QUDL24-MULTI-OPP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/2

Multi
Dielectric feed Quad LNB
IDLB-QUDL24-MULTI-OPP
Item: 3627
This innovative LNB was specifically designed for installations that make use of several LNBs on a satellite dish antenna. It’s novel
slim feed technology incorporating advanced dielectric materials and optimum front end design ensure maximum energy transfer
from the dish to the LNB circuits also when the LNB position is off the focal point. Further more, it’s long neck allows placing the
LNBs closely next to each other and gain access to satellites typically too close in their orbital position to be received with standard
neck LNBs on a certain satellite dish antenna. This LNB enables the reception of signal from one satellite and its distribution to up-to
4 single tuner Set-top boxes (or 2 in the case of a twin-tuner STB).
Main Features:
•Novel slim feed technology
•Low Phase Noise, DVB-S2 (HDTV) compliant
•Low Noise Figure
•Low power consumption
•High Cross-Pole performance
•High Frequency stability
Click object to rotate
Produktspezifikationen
| Marke: | Inverto |
| Kategorie: | Nicht kategorisiert |
| Modell: | IDLB-QUDL24-MULTI-OPP |
| Breite: | 173 mm |
| Gewicht: | 344 g |
| Produktfarbe: | Black, White |
| Höhe: | 132 mm |
| Betriebstemperatur: | -30 - 60 °C |
| Energieverbrauch: | 200 mA |
| RF Verbindungstyp: | F |
| Output Widerstand: | 75 Ohm |
| Rauschmaß: | 0.2 dB |
| Input frequenz-range: | 10.7 - 12.75 GHz |
| Ausgangsfrequenz: | 950 - 2150 MHz |
| Spannung Stellung-Welle Verhältnis (VSWR): | 2.0:1 |
| High-Band Eingangsfrequenzbereich: | 11.7 - 12.75 GHz |
| Low-Band Eingangsfrequenzbereich: | 10.7 - 11.7 GHz |
| High-Band Ausgangsfrequenzbereich: | 1100 - 2150 MHz |
| Low-Band Ausgangsfrequenzbereich: | 950 - 1950 MHz |
| Durchmesser Feedhorn: | 23 mm |
| Umwandlungsverstärkung: | 60 dB |
| Low-Band LO-Frequenz: | 9.75 GHz |
| High-Band LO-Frequenz: | 10.6 GHz |
| Spiegelfrequenzunterdrückung: | 40 dBmW |
| Störaussendung: | -60 dBmW |
| Lokaloszillator (LO) Phasenrauschen (10 kHz): | -90 dBc/Hz |
| Temperaturdrift: | 3 MHz |
| Anfangsgenauigkeit (±): | 1 MHz |
| Welligkeitsverstärkung (±): | 0.75 dB |
| Steuersignal Cc (Bandumschaltung): | 22 kHz |
| Versorgungsspannung Ca (vertikale Polarisation): | 11 - 14 V |
| Versorgungsspannung Cb (horizontale Polarisation): | 16 - 20 V |
| Kreuzpolarisationsentkopplung: | 22 dB |
| Kompressionspunkt (1 dB): | 0 dBmW |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Inverto IDLB-QUDL24-MULTI-OPP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Inverto
13 Juni 2024
13 Juni 2024
Bedienungsanleitung Nicht kategorisiert
Neueste Bedienungsanleitung für -Kategorien-
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026
22 Januar 2026