JennAir JMC1116AW Bedienungsanleitung
JennAir Mikrowelle JMC1116AW
Lies die bedienungsanleitung für JennAir JMC1116AW (12 Seiten) kostenlos online; sie gehört zur Kategorie Mikrowelle. Dieses Handbuch wurde von 27 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 14 Bewertungen. Hast du eine Frage zu JennAir JMC1116AW oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/12

MICROWAVE OVEN BUILT-IN TRIM KIT
INSTALLATION INSTRUCTIONS
Built-In Trim Kit Models MK2167, MK2160
UL listed for use over any electric or gas built-in oven, up to 30" (76.2 cm) wide
INSTRUCTIONS D’INSTALLATION
GARNITURE ENCASTRÉE POUR FOURÀMICRO-ONDES
Garniture encastrée pour modèles MK2167, MK2160
Homologation UL pour utilisation au-dessus de tous les fours encastrés électriques ou gaz, jusqu’à 30" (76,2 cm) de largeur
MICROWAVE OVEN SAFETY
Table of Contents / Table des matières
MICROWAVE OVEN SAFETY...................................................1
INSTALLATION INSTRUCTIONS..............................................2
Tools and Parts.......................................................................2
Location Requirements...........................................................2
Required Cutout Dimensions..................................................2
Trim Kit Frame Dimensions.....................................................3
Electrical Requirements..........................................................3
Prepare Microwave Oven........................................................3
Prepare Cutout/Cabinet Opening...........................................4
Install the Microwave Oven.....................................................5
Install Trim Kit Frame..............................................................6
SÉCURITÉ DU FOUR À MICRO-ONDES...........................................7
INSTRUCTIONS D’INSTALLATION....................................................7
Outillage et pièces.............................................................................7
Exigences d'emplacement................................................................7
Dimensions nécessaires de l'ouverture d'encastrement..................8
Dimensions du cadre de la trousse de garniture..............................8
Spécifications électriques.................................................................9
Préparation du four à micro-ondes...................................................9
Préparation de l'ouverture d'encastrement....................................10
Installation du four à micro-ondes..................................................11
Installation du cadre de la trousse degarniture.............................12
W10532204A
You can be killed or seriously injured if you don't immediately
Youcan be killed or seriously injured if you don'tfollow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
Produktspezifikationen
| Marke: | JennAir |
| Kategorie: | Mikrowelle |
| Modell: | JMC1116AW |
Brauchst du Hilfe?
Wenn Sie Hilfe mit JennAir JMC1116AW benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Mikrowelle JennAir
24 Juli 2025
7 Juni 2025
7 Juni 2025
11 Mai 2024
21 April 2024
1 April 2024
13 März 2024
20 Februar 2024
25 September 2023
5 September 2023
Bedienungsanleitung Mikrowelle
Neueste Bedienungsanleitung für -Kategorien-
21 Januar 2026
19 Januar 2026
18 Januar 2026
17 Januar 2026
17 Januar 2026
17 Januar 2026
16 Januar 2026
16 Januar 2026
15 Januar 2026
15 Januar 2026