Jilong JL027387N Bedienungsanleitung

Jilong Nicht kategorisiert JL027387N

Lies die bedienungsanleitung für Jilong JL027387N (17 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 20 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 10.5 Bewertungen. Hast du eine Frage zu Jilong JL027387N oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/17

Thank you for choosing the products manufactured by Jilong Company. Before using, please

read the manual carefully and keep it with original package for future reference.

Definition

Warning No protection against drowning Design working pressure

Mandatory instruction Swimmers only Read instructions first

Max. load capacity Fully inflate all air chambers Always supervise children in water

Device provides floating stability Device requires balancing Pool use only

Numbers of users: adults/children Safe distance to shore...m

Prohibition Not for children ...years of age and below

Do not use in offshore current. Do not use in offshore wind

See Table

SAFETY ADVICES:

1. Designate a person to be in charge of safety.

2. More supervision efforts are required when there are several persons inside the product.

3. If possible, teach users to swim.

4. Wet the neck, arms and legs before users enter the water.

5. Prohibit running or active games on product edges.

6. The users not good at swimming or unattended must wear life vest.

7. Never put toys nearby and upside the unattended product.

8. Read the manual and follow the instructions relating to safety tips, correct and complete product.

9. For your own safety, always heed the advice and warnings in these instructions.

10. Teach users the self-rescue actions.

11. Not suitable for non-swimmers! Do not use if an offshore wind is blowing! Do not use in areas subject to currents!

Does not protect against drowning! Do not swim under the frame! Do not jump unless the area is clear! Do not use in

breaking waves! Do not leave the air tube deflated! Supervise users at all times.

12. When accident occurs: Pull users out of water as early as possible. Change the wet clothes and cover users with warm

blanket. Ask for help and act awording to the method told to you.

13. Remember first-aid number and post it near the product.

14. Due to the design of this product, capsizing may occur if the loading distribution is uneven. Not following the

operator’s instructions may cause danger to life.

15649-15-121-GB

User’s Manual

15. Non-compliance with these operating instructions may expose you to serious danger. Only use the product in the

places and conditions for which it is intended.

△,!WARNING! Keep away from fire. Do not use around sharp objects. Do not dive or jump.

USING INSTRUCTION:

1. Choose a flat ground make sure there are no stone, gravel, glass, and any other sharp and edgy objects.

2. Take out the product from package and check if any parts missing, unfold it on the ground, lay flat, locate and open

inflation valve(s).

3. It is recommended that you use only a hand or foot pump for inflation.

Caution: Do not use the high-pressure air to inflate! Do not over-inflate! Never image to inflate the products with

mouth, as it will be so much difficult.

4. Slowly Inflate all parts and accessories until full one by one. Close and press all valves tightly after inflation to firm

and supportive.

CAUTION: It needs one adult to set up the product and it will let you quickly use the product within 10 minutes.

NOTE: When using this product, ensure that the valves are accessible to the user and remain out of the water.

5. After use, open and squeeze valves to release air, or insert a slim object such as a deflation tube to hold valve inner

stopper open. Being careful not to puncture your product or force air out of product. Allow air to escape slowly and

naturally.

STORAGE AND MAINTENANCE

Clean the product with clear water, then leave it in shady and cool place for airing, fold it into original package and place

it indoor for next use.

Pay attention to the fact that no sharp edges are shaped in the plastic foil while folding up the item. In winter, the pool is

not allowed to be placed at a temperature that is below 5 °C, otherwise the plastic film would be damaged.

Caution: Do not use the alkali or acid detergent to clean product! Do not leave product exposed under sunlight

directly because it will shorten the using-life of product.

WARNING: Noncomplince of the maintenance rules may result in serious hazards for health.

Repair Patch Instructions

(Small pinhole and small puncture leaks can be repaired with the included repair patch)

a) Locate the leak place.

b) Deflate the air.

c) Clean the area surrounding the leakage and wipe up all water from the surface.

d) Take out the repair patch, cut it into required shape and size, which should be litter larger than the leaking area, put the

patch on leaking area and press firmly.

e) You can use it again after 30 minutes drying of the repaired position.

If the damage is bigger than 1” (2.5cm), we recommend using a Silicone or rubber based glue for repair. Please read

warning statement on glue prior to use.

Shanghai Jilong Plastic Products Co. Ltd.

No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China

Tel: +86-21-58942200 E-mail: info@jilong.com Web: www.jilong.com

Produktspezifikationen

Marke:	Jilong
Kategorie:	Nicht kategorisiert
Modell:	JL027387N
Breite:	690 mm
Tiefe:	1830 mm
Gewicht:	680 g
Produkttyp:	Schwimmende Matratze
Produktfarbe:	Blue, Pink, Yellow
Material:	Vinyl
Maximales Lastgewicht:	80 kg
Verpackungsbreite:	160 mm
Verpackungstiefe:	45 mm
Verpackungshöhe:	230 mm
Zertifizierung:	EN15649
Ursprungsland:	China
Verpackungsart:	Box
Empfohlenes Alter in Jahren (mind.):	14 Jahr(e)
Produkte pro Palette:	768 Stück(e)
Verpackungsvolumen:	36000 cm³
Mindestbestellmenge:	12 Stück(e)
Anzahl der Kammern:	3
Intrastat-Code:	95062900
Integriertes Kissen:	Ja