Jilong JL097201NPF Bedienungsanleitung

Jilong Aufstellpool JL097201NPF

Lies die bedienungsanleitung für Jilong JL097201NPF (20 Seiten) kostenlos online; sie gehört zur Kategorie Aufstellpool. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Jilong JL097201NPF oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/20

Thank you for choosing the products manufactured by Jilong Company.

Before using, please read the manual carefully and keep it with original package

for future reference.

△,!WARNING!

Warning. Never leave your child unattended – drowning hazard.

Warning. Only for domestic use. Only for outdoor. Children can

drown in very small amounts of water. Empty the pool when not

in use. Do not install the paddling pool over concrete, asphalt or

any other hard surface. Toy intended to be assembled by an

adult. Adult supervision required. Keep away from fire. Do not

use in water.

1. CONTENT：1pc product 2. Instruction Manual 3. Repair patch

2. USING INSTRUCTION:

1） Place the product on a level surface at least 2m from any structure or obstruction

such as a fence,garage,house,overhanging branches,laundry lines or electrical wire.

2） Recommend back towards the sun when playing.

3） Take out the product from package and unfold it on the ground, lay flat.

4） It is recommended that you use only a hand or foot pump for inflation.

5） Caution: Do not use the high-pressure air to inflate! Do not over-inflate!

6） Slowly Inflate all parts and accessories until full one by one, close and press all

valves tightly after inflation to firm and supportive.

7） Locate and close the drain valve on the bottom of pool tightly (if applicable), fill

pool with water till the capacity reach to 3/4 roughly.

8） Finally, enjoy the happy hours.

9） After use, open the drain valve on the bottom of pool to drain water (if

applicable). Open and squeeze base of valves to release air, or insert a slim

object such as a deflation tube to hold valve inner stopper open. Being careful

not to puncture your product or force air out of product. Allow air to escape

slowly and naturally.

SPP-10-E

CVP-15-GB

User’s Manual

Inflatable Pool

10） Modifications made by the consumer to the original activity toy shall be carried

out according to the instructions of the manufacturer. Please do not use the

rope or net that the minimum diameter less than 2mm or the maximum length

more than 30cm.

3. STORAGE AND MAINTAIN

1）It is necessary to carry out checks and maintenance of the main parts

(crossbeams, suspensions, anchors etc.) at regular intervals, if these checks are

not carried out the activity toy could overturn or otherwise become a hazard.

Replace defective parts in accordance with the manufacturer's instructions.

2）It is of particular importance to carry out the maintenance operations and follow

and respect the supplied recommandations at the beginning of each season as

well as at regular intervals during the usage season.

3) Change the water of paddling pools frequently(particularly in hot weather) or

when noticeably contaminated,unclean water is harmful to the user’s health.

4) Clean the product with clear water, then leave it in shady and cool place for

airing, fold it into original package and place it indoor for next use. Caution: Do

not use the alkali or acid detergent to clean product! Do not leave product

exposed under sunlight directly because it will shorten the using-life of

product.

4. REPAIR PATCH INSTRUCTION (Small pinhole and small puncture leaks can

be repaired with the included repair patch)

a) Locate the leak place.

b) Deflate and drain the water.

c) Clean the area surrounding the leakage and wipe up all water from the surface.

d) Take out the repair patch, cut it into required shape and size, which should be

litter larger than the leaking area, put the patch on leaking area and press firmly.

e) You can use it again after 30 minutes drying of the repaired position.

If the damage is bigger than 1” (2.5cm), we recommend using a Silicone or rubber

based glue for repair. Please read warning statement on glue prior to use.

Shanghai Jilong Plastic Products Co. Ltd.

No. 460 Lanxue Road, Huanglou, Pudong Area, Shanghai, 201205, P.R. China

Tel: +86-21-58942200 E-mail: info@jilong.com Web: www.jilong.com

Produktspezifikationen

Marke:	Jilong
Kategorie:	Aufstellpool
Modell:	JL097201NPF
Breite:	1870 mm
Dicke:	0.25 mm
Tiefe:	1360 mm
Gewicht:	2150 g
Produktfarbe:	Mehrfarbig
Höhe:	1140 mm
Färbung:	Muster
Verpackungsbreite:	250 mm
Verpackungstiefe:	10 mm
Verpackungshöhe:	180 mm
Verpackungsart:	Box
Anzahl der Personen:	5 Person(en)
Empfohlenes Alter in Jahren (mind.):	2 Jahr(e)
Empfohlenes Alter in Jahren (max.):	10 Jahr(e)
Verpackungsinhalt:	inflatable toys, 5 x inflatable toys
Fassungsvermögen:	150 l
Produkte pro Palette:	260 Stück(e)
Verpackungsvolumen:	3000 cm³
Mindestbestellmenge:	4 Stück(e)
Intrastat-Code:	95062900
Flickzeug enthalten:	Ja