JL Audio C2-525 Bedienungsanleitung


Lies die bedienungsanleitung für JL Audio C2-525 (12 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 15.5 Bewertungen. Hast du eine Frage zu JL Audio C2-525 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/12
owner’s manual
Thank you for choosing a JL Audio EvolutionC2 Component System
for your automotive sound system.
These Evolution™ Speakers have been designed and manufactured to
exacting standards in order to ensure years of musical enjoyment in your
vehicle. For maximum performance, we highly recommend that you have
your new speakers installed by an authorized JL Audio dealer. Your
authorized dealer has the training, expertise and installation equipment
to ensure optimum performance from this product. Should you
decide to install the speakers yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call the JL Audio Technical Support Department
at (954) 443-1100 during business hours.
5.25-inch (130 mm) 2-Way Component System
2 | JL Audio - C2-525 Owners Manual
AE
B
F
D
C
Due to ongoing product development, all specifications are subject to change without notice.
Woofer Physical Dimensions
Frame Outer Diameter (A) 5.20 in. / 132.0 mm
Grille Tray Outer Diameter (B) 6.01 in. / 152.8 mm
Magnet Outer Diameter (C) 2.76 in. / 70.0 mm w/o cover
Frontal Grille Protrusion (D) 0.72 in. / 18.2 mm
Mounting Hole Diameter (E) 4.56 in. / 115.9 mm
Mounting Depth (F) 2.50 in. / 63.5 mm w/o cover
A
D
C
A
D
B
C
B
A
Crossover Network Physical Dimensions
Height (A) 4.72 in. / 119.9 mm
Width (B) 3.36 in. / 85.3 mm
Depth (C) 1.44 in. / 36.6 mm
Tweeter Fixture Physical Dimensions Flush-Mount Surface-Mount
Fixture Outer Diameter (A) 1.87 in. / 47.5 mm 1.69 in. / 42.9 mm
Fixture Mounting Hole Diameter (B) 1.625 in. / 41.3 mm N/A
Fixture Mounting Depth (C) 0.76 in. / 19.3 mm N/A
Tweeter Frontal Protrusion (D) 0.29 in. / 7.4 mm 0.92 in. / 23.4 mm
3
Due to ongoing product development, all specifications are subject to change without notice.
C2-525 sPeCiFiCaTions:
Woofer: Injection-molded, Mica-filled, Polypropylene Cone,
Butyl Rubber Surround, 1 in. Voice Coil on Kapton® Former,
Flat, Symmetrical Roll Spider, Ferrite Magnet
Tweeter: 0.75 in. (19 mm) Silk Dome, Ferrofluid Cooling /
Damping, Neodymium Magnet
Crossover Networks: 1st Order Low-Pass Filter, 2nd Order
High-Pass Filter, 3-Position Adjustable Tweeter Level, Premium
Mylar® Capacitors Premium Air-Core Inductors
Continuous Power Handling: 60 Watts
Recommended Amp Power: 15-100 Watts per channel (RMS)
Efficiency: 89.0 dB @ 1W/1m | 95.0 dB @ 1W/0.5m
Sensitivity: 92.0 dB @ 2.83V/1m
Nominal Impedance: 4 ohm
Frequency Response: 63 Hz - 22 KHz ± 3 dB
Included Components and Parts:
Two C2-525cw 5.25-inch (130 mm) Woofers
Two C2-075ct 0.75-inch (19 mm) Tweeters
Two C2-525-XO Crossover Networks
Two Flush-Mount Tweeter Fixtures
Two Surface-Mount Tweeter Fixtures
Two Metal Spring Clips for Tweeter Fixtures
• Two Grille Assemblies
Two Self-Adhesive JL Audio Nameplates for Grilles
Twelve #8 x 1.2 inch (30 mm) Sheet Metal Screws
Four #6 x 1-inch (25 mm) Sheet Metal Screws
Two 1.18-inch (30 mm) Machine Screws
Eight Mounting Clips for Woofer Mounting
Two 4.7 mm Female Crimpable Connectors
Two 2.8 mm Female Crimpable Connectors
Two 4.7 Male Crimpable Connectors
Two 2.8 mm Male Crimpable Connectors
Twelve Crimpable Spade Connectors
GeTTinG sTarTeD
•Turnofftheaudiosystem.Itisalso
advisabletodisconnectthenegative(–)
terminalofyourvehicle’sbatterywhenever
performinginstallationwork.
•Beforecutting,drillingorinsertinganyscrew,
checkclearancesonbothsidesoftheplanned
mountingsurface.Alsocheckforanypotential
obstacles,suchaswindowtracksandmotors,
wiringharnesses,etc.Checkbothsidesofthe
vehicle,manyvehiclesarenotsymmetrical!
•Alwayswearprotectiveeyewear.
sPeaKer PlaCemenT ConsiDeraTions
Inmostcases,yourspeakerswillbeplacedinto
factoryspeakerlocations.Ifyouhavesomespeaker
mountingflexibility,keepthefollowinginmind:
Lowermountinglocations,suchasthelowerfront
cornerofadoororakick-panelprovidethegreatest
pathlengthdistancesforthesoundemittedbythe
speakers.Forthisreason,theyaregenerallymore
desirablethanhighermountinglocations.Higher
mountinglocationswillusuallyresultinextreme
near-sidesoundstagebiaswhichcompromisesthe
stereolisteningexperience.


Produktspezifikationen

Marke: JL Audio
Kategorie: Lautsprecher
Modell: C2-525

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio C2-525 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten