JL Audio SB-POL-RZG2R/10TW3 Bedienungsanleitung

JL Audio Lautsprecher SB-POL-RZG2R/10TW3

Lies die bedienungsanleitung für JL Audio SB-POL-RZG2R/10TW3 (9 Seiten) kostenlos online; sie gehört zur Kategorie Lautsprecher. Dieses Handbuch wurde von 22 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 11.5 Bewertungen. Hast du eine Frage zu JL Audio SB-POL-RZG2R/10TW3 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/9

I N S T A L L A T I O N G U I D E

for the

SB-POL-RZG2R/10TW3

SKU# 94631

2014 & Up Polaris RZR XP 1000, RZR XP 4 1000

RZR 900 XC, & RZR 4 900

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your

authorized JL Audio dealer. The installation professionals employed by your

dealer have the necessary tools and experience to disassemble and reassemble

your vehicle properly. If you prefer to perform your own installation, please read

this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely

vital that the Stealthbox® be properly mounted to the vehicle

according to these instructions. Failure to mount the enclosure

properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the

enclosure caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a

collision or sudden deceleration.

INSTALLATION

DIFFICULTY:

ESTIMAT ED TIME:

2-3 HOUR S

Enclosure Type: Sealed

Driver Type: 10TW3-D4

Nominal Impedance: 2 ohms

Continuous Power Handling: 400 watts (RMS method)

Continued on Next Page

OUT

SB-POL-RZG2R/10TW3 INSTR_SKU# 011463

IN CLU DE D HAR DWA R E

Continued on Next Page

Page 2 • JL Audio, Inc., 2020

SB-POL-RZG2R/10TW3 INSTR_SKU# 011463

BOM ID Qty SKU Description

1 7 153729 1/4 - 20 x 1” Stainless Steel Serrated Flange Bolt

2 1 153772 Top Bracket

3 1 153774 Right Side Heat Shield

4 1 153713 Stainless Steel Cushion Clamp

5 1 153773 Le Side Heat Shield

6 9 153735 #8 x 1/2” Stainless Steel Phillips Pan Head Screw

7 6 153782 6 - 32 x 3/4” Stainless Steel Button Head Cap Screw

8 1 153779 Grille Mesh

9 1 153780 Grille Trim

10 6 153781 #6 Stainless Steel Flat Washer

11 6 153783 6 - 32 Stainless Steel Nylon Insert Locknut

12 1 153771 Bottom Bracket

- 1 150249 Foam Tape (not shown)

Note: For optimum performance, JL Audio recommends applying the included Foam Strips (or sound damping material) to surrounding plastic panels to reduce unwanted vibrations.

P O W E R R E CO M M E N D A T I O N

JL Audio recommends high quality ampliers such as the JL Audio MX300/1. The diagram below shows the recommended crossover settings for the MX300/1. For a detailed description of the

amplier settings, consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

C O N N EC T I O N S

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your

Stealthbox® amplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for