JL Audio Stealthbox SB-D-MGACABG4/10TW1 Bedienungsanleitung

JL Audio Nicht kategorisiert Stealthbox SB-D-MGACABG4/10TW1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für JL Audio Stealthbox SB-D-MGACABG4/10TW1 (6 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/6
I N S T A L L A T I O N G U I D E
for the
SB-D-MGACABG4/10TW1
SKU# 94701
2006 & Up Ram Mega Cab
Installation requires appropriate tools and safety equipment.
Professional installation is recommended.
If you prefer to perform your own installation, please read this
installation guide completely before beginning.
Before cutting or drilling, check for potential obstacles behind
mounting surfaces.
Mount this product securely to prevent damage or injury in
severe conditions.
INSTALLATION
DIFFICULT Y:
ESTIMAT ED TIME:
1 HOUR
Enclosure Type: Sealed
Driver Type: 10TW1-4
Nominal Impedance: 2 ohms
Continuous Power Handling: 600 watts (RMS method)
Continued on Next Page
25
OUT
OF
SB-D-MGACABG4/10TW1 INSTR_SKU# 011577
I N C LUD E D H A R D WA R E
Continued on Next Page
Page 2 • JL Audio, Inc., 2022
SB-D-MGACABG4/10TW1 INSTR_SKU# 011577
BOM ID DescriptionQty SKU
1 2 151383 3/8 - 16 x 2-1/4” Set Screw
2 2 151345 3” x 3” Wax Square
3 2 151126 3/8” Flat Washer
4 2 151081 3/8” Split Lock Washer
5 2 151406 3/8 - 16 Hex Nut
6 2 154470 3/8 - 16 x 3/4” Set Screw
P O W E R R E C O M M E N D AT I O N
JL Audio recommends high quality ampliers such as the JL Audio XD600/1v2. The diagram below shows the recommended crossover settings for the XD600/1v2. For a detailed description of the
amplier, consult the owners manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.
C O N N E C T I O N S
Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your
Stealthboamplier. Other kits are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for
both channels of the amplier. JL Audio recommends using 12 AWG speaker wire for subwoofers, such as our XC-BCS12-25.
Continued on Next Page
Page 3 • JL Audio, Inc., 2022
SB-D-MGACABG4/10TW1 INSTR_SKU# 011577


Produktspezifikationen

Marke: JL Audio
Kategorie: Nicht kategorisiert
Modell: Stealthbox SB-D-MGACABG4/10TW1

Brauchst du Hilfe?

Wenn Sie Hilfe mit JL Audio Stealthbox SB-D-MGACABG4/10TW1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert JL Audio

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-