JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/GA Bedienungsanleitung

Lies die bedienungsanleitung für JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/GA (3 Seiten) kostenlos online; sie gehört zur Kategorie Subwoofer. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 3.6 Sterne aus 15 Bewertungen. Hast du eine Frage zu JL Audio Stealthbox SB-F-150-SPRCRW/13TW5v2/GA oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

InstallatIon GuIde

for the

SB-F-F150SCR/13TW5

sKu#94460,94461,94462

2008+

Thank you for choosing a JL Audio Stealthbox

® for your automotive sound system. With proper

installation, your new vehicle-specific enclosed subwoofer system will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox

® installed by your authorized JL Audio

dealer. The installation professionals employed by your dealer have the necessary tools and experience

to disassemble and reassemble your vehicle properly. Also, keep in mind that your warranty coverage

extends to 2 years if your system is installed or approved by your authorized JL Audio dealer. If you

prefer to perform your own installation, please read this installation guide completely

before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

steP 1

Remove any contents in the backseat area and flip the seat

up. Place the Stealthbox® on the floor under the drivers side

backseat as shown.

Continued on Next Page

steP 2

There are four brackets that need to be installed on the

enclosure, two on each end.

Shown is the end of the enclosure that would be mounted

near the middle of the cab of the truck, at the other end of

the enclosure the brackets are mounted so that the bottom

tabs go under the enclosure.

The long end of the bracket attaches to the enclosure using

the supplied hardware (see detaIl below). Do not tighten

hardware down at this point, just get it in place.

d e ta I l

SB-F-F150SCR/13TW5 INSTR_SKU# 011297

InstallatIon

dIF FICu lt Y:

25

out

oF

estImated tIme:

1 HouR

THREADED INSERT

MOUNTING BRACKET

LOCK WASHER

FLAT WASHER

HEX BOLT

STEALTHBOX WALL

Produktspezifikationen