SB-F-MUCUPE/13W3v3_SB-F-MUCONV2/13W3v3 INSTR_SKU# 011216
C O N G R A T U L A T I O N S
You have completed the installation for this model!
Please refer to the Power Recommendation section for an
amplifier recommendation and basic set-up help.
S T E P 6
From under the vehicle, place the supplied lock washer, flat
washer, flat washer, fender washer onto the supplied hex
bolt.
Note: For added protection it is recommended that
you apply a bead of silicone between the vehicle and
the fender washer. After the bolt assembly is tightly
secured, it is also recommended that vehicle under-
coating material is applied to the exposed assembly.
Place the bolt assembly through the exposed hole and apply
the bolt into the threaded insert of the Stealthbox®.
Secure tightly.
S T E P 5
As in the picture, slide the front of the Stealthbox® into place.
Then slide the rear of the Stealthbox® into place.
Make sure that the speaker wire and the factory trunk wir-
ing do not get caught up between the Stealthbox® and the
body of the vehicle.
S T E P 4
Place the Stealthbox® into the trunk.
Run speaker wire to the Stealthbox® and wire to the terminal.
Double check the woofer for proper operation.
Page 3 • JL Audio, Inc 2016
All specifications are subject to change without notice. “JL Audio®” and the JL Audio logo, “Stealthbox” and the Stealthbox logo are registered
trademarks of JL Audio, Inc. “Ahead of the Curve” and its respective logo is a trademark of JL Audio, Inc.
JLA-SKU# 011216 09.20.2016 • Printed in USA • ©2016 JL Audio, Inc.
For more detailed information please visit us online at www.jlaudio.com.
(954) 443-1100
w w w . j l a u d i o . c o m
1 0 3 6 9 N O R T H C O M M E R C E P A R K W A Y • M I R A M A R , F L O R I D A • 3 3 0 2 5 • U S A
I N C L U D E D H A R D W A R E
(1) 3/8-inch x 2-1/2-inch - 16 Hex Bolt
(1) 3/8-inch USS Flat Washer
(1) 3/8-inch Fender Washer
(1) 3/8-inch Lock Washer
S P E C I F I C A T I O N S
Enclosure Type: Acoustic Suspension (sealed)
Driver Type: 13W3v3-2
Nominal Impedance: 2 ohms
Continuous Power Handling: 600 Watts
P O W E R R E C O M M E N D A T I O N
JL Audio recommends using a high quality amplifier such as the JL Audio XD600/1v2. The diagram below shows
the recommended crossover settings for the XD600/1v2 when being used to power your Stealthbox ®
.
The JL Audio XD600/1v2 is a very versatile audio component. Please consult the owner’s manual for even more
detailed information about installing and tuning this amplifier.
M I D / H I G H F R E Q U E N C Y D R I V E R F I T M E N T
A variety of JL Audio coaxial and component systems will fit in the factory speaker locations of you vehicle.
Front Speaker Size / Location: 5x7 / 6x8-inch / Front Doors
Fits JL Audio Models: TR570-CXi, C2-570x, C3-570, C5-570x, & C5-570
Rear Speaker Size / Location: 5x7 / 6x8-inch/ Rear Deck
Fits JL Audio Models: TR570-CXi, C2-570x, C3-570, C5-570x, & C5-570