JL Audio XDM200/2 Bedienungsanleitung
Lies die bedienungsanleitung für JL Audio XDM200/2 (17 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu JL Audio XDM200/2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/17

200W 2-CHANNEL AMPLIFIER
OWNER ’S MA NUAL
MA NU E L D ’UTILI SATION
MA NUA L DE L PRO PIETARI O
BEDI ENUNGSA NLEITUNG
MA NUA LE DEL PRO PRI ETARIO

2 | JL Audio® - XDM200/2
x1 2.5 mm
x1 x1
0.50 in
(12 mm)
0.50 in
(12 mm)

4 | JL Audio® - XDM200/2
Connection Description Notes
1
+12 VDC Positive (+12V) Power Connection • 4 AWG wire (8 AWG minimum)
• Install 20A fuse at (+) battery post
Ground Negative (GND) Ground Connection • 4 AWG wire (required)
Remote Positive (+12V) Activation Connection • 18 – 12 AWG wire capacity
• See Turn On Mode for more info
2
CH. 1 Input Left Input Signal, Black RCA • Accepts 200mV – 4V input voltage
• See for more info Input Mode
CH. 2 Input Right Input Signal, Red RCA
Preout 1 Left Pass-Through Preamp Signal, Black RCA • Same signal that is connected to
CH. 1&2 inputs
• Unaected by the amplier’s ltersPreout 2 Right Pass-Through Preamp Signal, Red RCA
3Remote Level
Control
Remote Level Controller Connection (optional)
(HD-RLC or MHD-RLC)
• Operates as an attenuator only:
Fully counter-clockwise = Level Muted
Fully clockwise = Level Unaected
• Multiple ampliers can be controlled
from a single HD-RLC using a non-
duplex phone line splitter and multiple
phone cables.
4
CH. 1 (L)
Speaker
Output
(+) Positive Speaker Output CH. 1&2 Bridged (+)
• Minimum impedance load:
Stereo mode ≥2 ohms
Bridged mode ≥4 ohms
• 16 – 8 AWG wire capacity
(–) Negative Speaker Output
CH. 2 (R)
Speaker
Output
(+) Positive Speaker Output
(–) Negative Speaker Output CH. 1&2 Bridged (–)
CONNECTIONS
1 2 3 4
Produktspezifikationen
Marke: | JL Audio |
Kategorie: | Empfänger |
Modell: | XDM200/2 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit JL Audio XDM200/2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Empfänger JL Audio
12 Oktober 2024
7 Oktober 2024
2 Oktober 2024
19 September 2024
15 September 2024
5 September 2024
5 September 2024
29 August 2024
12 August 2024
6 August 2024
Bedienungsanleitung Empfänger
- Key Digital
- Nokia
- Comprehensive
- TROND
- Kathrein
- Soundtrack
- Thomann
- RME
- Behringer
- WyreStorm
- Exibel
- Audac
- Krell
- Monoprice
- BC Acoustique
Neueste Bedienungsanleitung für -Kategorien-
7 August 2025
7 August 2025
6 August 2025
6 August 2025
6 August 2025
5 August 2025
5 August 2025
5 August 2025
5 August 2025
5 August 2025