Joblotron AN-80 Bedienungsanleitung


Lies die bedienungsanleitung für Joblotron AN-80 (4 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 48 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 24.5 Bewertungen. Hast du eine Frage zu Joblotron AN-80 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/4
Externí anténa AN-80 1 / 2 MKE51400
Externí anténa AN-80
Tato anténa je určena výhradně pro bezdrátové výrobky firmy Jablotron,
komunikující na frekvenci 868 MHz a vybavené konektorem pro externí anténu
typu AN-8x
Pokud použijete tuto anténu, riď řte se manlem p íslušného bezdrátového
zařízení.
Aktivní část antény doporučujeme montovat svisle a tato část nesmí být
stíněna žádným kovovým předmětem. Anténa smí být lepena pouze na elektricky
nevodivé části.
Pokud je anténa použita v zabezpečovacím systému, musí být umístěna v
prostoru, který je systémem pokryt (chráněn).
Upozornění: neprodlužujte přívodní kabel antény.
Technické parametry:
pracovní frekvence 868 MHz
impedance 50
Ω
lka přívodního kabelu 2m
Externí anténa AN-80 1 / 2 MKE51400
Externí anténa AN-80
Tato anténa je určena výhradně pro bezdrátové výrobky firmy Jablotron,
komunikující na frekvenci 868 MHz a vybavené konektorem pro externí anténu
typu AN-8x
Pokud použijete tuto anténu, riď řte se manuálem p íslušného bezdrátového
zařízení.
Aktivní část antény doporučujeme montovat svisle a tato část nesmí být
stíněna žádným kovovým předmětem. Anténa smí být lepena pouze na elektricky
nevodivé části.
Pokud je anténa použita v zabezpečovacím systému, musí být umístěna v
prostoru, který je systémem pokryt (chráněn).
Upozornění: neprodlužujte přívodní kabel antény.
Technické parametry:
pracovní frekvence 868 MHz
impedance 50
Ω
lka přívodního kabelu 2m
The AN-80 external antenna 2 / 2 MKE51400
The AN-80 external antenna
This antenna is designed for Jablotron wireless products which
use a frequency of 868 MHz and are equipped with a connector only
for use with AN-8x antennas.
If you want to use the AN-80 antenna see the wireless device’s
manual for detailed instructions.
The active part of the antenna should be installed vertically and it
should not be obstructed by any metal objects.
The antenna can only be placed on a non-conducting material.
If the antenna is used in an alarm system, it should be located in
the area which is protected by the alarm system.
Note: Do not extend its RF cable.
Technical specifications:
Communication band 868 MHz
Impedance 50
Ω
Cable length 2m
The AN-80 external antenna 2 / 2 MKE51400
The AN-80 external antenna
This antenna is designed for Jablotron wireless products which
use a frequency of 868 MHz and are equipped with a connector only
for use with AN-8x antennas.
If you want to use the AN-80 antenna see the wireless device’s
manual for detailed instructions.
The active part of the antenna should be installed vertically and it
should not be obstructed by any metal objects.
The antenna can only be placed on a non-conducting material.
If the antenna is used in an alarm system, it should be located in
the area which is protected by the alarm system.
Note: Do not extend its RF cable.
Technical specifications:
Communication band 868 MHz
Impedance 50
Ω
Cable length 2m


Produktspezifikationen

Marke: Joblotron
Kategorie: Sicherheitskamera
Modell: AN-80

Brauchst du Hilfe?

Wenn Sie Hilfe mit Joblotron AN-80 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten