Joovy Graco Car Seat Adapter Bedienungsanleitung

Lies die bedienungsanleitung für Joovy Graco Car Seat Adapter (2 Seiten) kostenlos online; sie gehört zur Kategorie Babyprodukte. Dieses Handbuch wurde von 22 Personen als hilfreich bewertet und erhielt im Schnitt 3.8 Sterne aus 11.5 Bewertungen. Hast du eine Frage zu Joovy Graco Car Seat Adapter oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

!WARNING

This infant car seat adapter is for use ONLY on the Joovy Zoom Joggers. DO NOT use on other stroller models.

This infant car seat adapter is for use ONLY with the Graco® infant car seat models identied below. DO NOT use other infant car seat models.

ALWAYS install the infant car seat so that the child is facing toward the rear (handlebar) of the stroller.

ALWAYS position the infant car seat so that it securely snaps into place inside the infant car seat adapter frame.

!WARNING

Before each use, check to make sure all four clamps are secure and all Velcro® straps are fully attached.

Installing/Using the Infant Car Seat Adapter

• UnsnapthevesnapslocatedonBOTHsidesoftheseat.See Figure 1.

• Foldthefabricinsideandunderthestrollerframetubessothatthetubesareclearlyexposedonbothsidesofthestroller.See Figure 2.

• Positionthecanopysoitisopenedhalfway.Reclinetheseattoitsmaximumreclineposition.See Figure 3.

• RemovetheVelcro®strapsfromeachclamp,thenopenallfourclampsontheadapter.

• Placethecarseatadapteronthestrollerframetubessothatthecanopyhingebracketsarebetweentheadapterclamps.See Figure 4.

DO NOT allow any of the seat fabric to be captured by the clamp.

• Closeallfourclampsaroundthestrollerframetubes.See Figure 5. Makesurethatallfourclampsarefullyclosedandnoseatfabricis

capturedbytheclamps.

• InserttheloopendofoneVelcro®strapbetweenoneadapterclampandtheseatfabric.Attachthelooparoundthetabontheclamp.

See Figure 6.

• WraptheVelcro®straptightlyaroundtheclamp.See Figure 7.

• EnsurethatthemiddleloopoftheVelcro®straptsovertheclamptab. See Figure 8.

• ContinuewrappingtightlyuntiltheentirelengthoftheVelcro®strapissecuredtogether.MakesuretheedgesoftheVelcro®strapare

alignedformaximumstrength.See Figure 9.

• RepeatfortheotherthreeclampsandVelcro®straps.

• Closethecanopycompletely.

NOTE: Tomaximizespaceforyourbaby,attachthetwosetsofsnapsfoundontheundersideofthecanopy.See Figure 10.

• PlacetheGraco®infantcarseat(sothecarseatfacesthehandlebar)intotheadapteruntilthecarseatsnapsintoplace.Pulluponthecar

seattoensureitissecure.See Figure 11.

• Toremovetheinfantcarseat,pullthereleaselever(sameleverusedtoreleasethecarseatfromitsbase)andliftup.

NOTE: strollerfoldswithcarseatadapterinstalled.

Removing the Infant Car Seat Adapter

• Toremovethecarseatadapter,rstpositionthecanopysothatitisopenedhalfway.

• RemoveallfourVelcro®strapsfromtheclamps.

• Openallfourclampsandremovetheadapterfromthestroller.

• ReattachthefourVelcro®strapstotheclampsontheadapterandstoretheadapterforfutureuse.

• WraptheseatfabricoverthestrollerframetubesandreattachthevesnapslocatedonBOTHsidesofthestroller.

Zoom

Graco® Car Seat Adapter

00948

GRACO® CAR SEAT ADAPTER COMPATABILITY

Graco® Classic Connect

Produktspezifikationen