Joovy Peg Perego Car Seat Adapter Bedienungsanleitung

Lies die bedienungsanleitung für Joovy Peg Perego Car Seat Adapter (2 Seiten) kostenlos online; sie gehört zur Kategorie Babyprodukte. Dieses Handbuch wurde von 45 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 9 Bewertungen. Hast du eine Frage zu Joovy Peg Perego Car Seat Adapter oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

!WARNING

This infant car seat adapter is for use ONLY on the Joovy Zoom Joggers. DO NOT use on other stroller models.

This infant car seat adapter is for use ONLY with the Peg Perego® infant car seat models identied below. DO NOT use other infant car seat

models.

ALWAYS install the infant car seat so that the child is facing toward the rear (handlebar) of the stroller.

ALWAYS position the infant car seat so that it securely snaps into place inside the infant car seat adapter frame.

!WARNING

Before each use, check to make sure all four clamps are secure and all Velcro® straps are fully attached.

Installing/Using the Infant Car Seat Adapter

• UnsnapthevesnapslocatedonBOTHsidesoftheseat.See Figure 1.

• Foldthefabricinsideandunderthestrollerframetubessothatthetubesareclearlyexposedonbothsidesofthestroller.See Figure 2.

• Positionthecanopysoitisopenedhalfway.Reclinetheseattoitsmaximumreclineposition.See Figure 3.

• RemovetheVelcro®strapsfromeachclamp,thenopenallfourclampsontheadapter.

• Placethecarseatadapteronthestrollerframetubessothatthecanopyhingebracketsarebetweentheadapterclamps.See Figure 4.

DO NOT allow any of the seat fabric to be captured by the clamp.

• Closeallfourclampsaroundthestrollerframetubes.See Figure 5. Makesurethatallfourclampsarefullyclosedandnoseatfabricis

capturedbytheclamps.

• InserttheloopendofoneVelcro®strapbetweenoneadapterclampandtheseatfabric.Attachthelooparoundthetabontheclamp.

See Figure 6.

• WraptheVelcro®straptightlyaroundtheclamp.See Figure 7.

• EnsurethatthemiddleloopoftheVelcro®straptsovertheclamptab. See Figure 8.

• ContinuewrappingtightlyuntiltheentirelengthoftheVelcro®strapissecuredtogether.MakesuretheedgesoftheVelcro®strapare

alignedformaximumstrength.See Figure 9.

• RepeatfortheotherthreeclampsandVelcro®straps.

• Closethecanopycompletely.

NOTE: Tomaximizespaceforyourbaby,attachthetwosetsofsnapsfoundontheundersideofthecanopy.See Figure 10.

• PlacethePegPerego®infantcarseat(sothecarseatfacesthehandlebar)intotheadapteruntilthecarseatsnapsintoplace.Pullupon

thecarseattoensureitissecure.See Figure 11.

• Toremovetheinfantcarseat,pullthereleaselever(sameleverusedtoreleasethecarseatfromitsbase)andliftup.

NOTE: strollerfoldswithcarseatadapterinstalled.

Removing the Infant Car Seat Adapter

• Toremovethecarseatadapter,rstpositionthecanopysothatitisopenedhalfway.

• RemoveallfourVelcro®strapsfromtheclamps.

• Openallfourclampsandremovetheadapterfromthestroller.

• ReattachthefourVelcro®strapstotheclampsontheadapterandstoretheadapterforfutureuse.

• WraptheseatfabricoverthestrollerframetubesandreattachthevesnapslocatedonBOTHsidesofthestroller.

Zoom

Peg Perego® Car Seat Adapter

00951

PEG PEREGO® CAR SEAT ADAPTER COMPATABILITY

Peg Perego® Primo Viaggio

Produktspezifikationen