Joranalogue Morph 4 Bedienungsanleitung

Lies die bedienungsanleitung für Joranalogue Morph 4 (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 34 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 7 Bewertungen. Hast du eine Frage zu Joranalogue Morph 4 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

MORPH 4

DIMENSIONAL MODULATION ARRAY

1

INTRODUCTION

Modulation is the core concept of modular

synthesis: parameters changing over time,

adding movement and musical interest to what

would otherwise be merely static sounds. Being

able to control the amplitude of signals

throughout a patch is therefore essential, and

one can never have too many voltage controlled

amplifiers (VCAs).

Designed as a -fullyfeatured modulation hub for

Eurorack synthesisers, Morph 4 takes the basic

concept of the multimodule to the next -VCA

level.

Four linear amplitude modulators are controlled

by a master ‘morph’ parameter. The response of

each modulator to this parameter is completely

variable, both manually and under voltage

control, and can be overridden if desired. Each

response is triangular, with the ‘’ position

parameter setting the maximum point along the

morph axis, while ‘span’ determines the width of

the triangle’s base.

In addition to separate signal inputs and outputs,

a variety of combined outputs is available as well:

A+B, C+D, addand averag (unity gain)ing mixes,

and instantaneous minimum and maximum.

Input normalisation makes it easy to send the

same signal to multiple modulators, while

output and modulator response LEDs provide

essential visual feedback.

The combination of master control, fully flexible

modulators and multiple combined outputs

creates a module truly embodying the spirit of

‘patch programmable’ modular synthesis. Use

Morph 4 as a voltage controlled mixer, dual

crossfader, dual panner, interpolating scanner,

interpolating distributor,quad VCA ,

quadraphonic controller, slope modifier, rectifier,

complex waveshaper or something in between

any of those—the choice is yours.

CONTENTS

I 4 n the Morphbox, you’ll find:

Product card, stating serial number and

production batch.

16--10-topin Eurorack power cable.

Mounting hardware: two black M3 x 6 mm

hex screws, two black nylon washers and a

hex key.

T 4 he Morphmodule itself, in a protective

cotton bag.

If any of these items are missing, please contact

your dealer or support@joranalogue.com.

Produktspezifikationen