Joy-it JT-LCR-T7 Bedienungsanleitung
Joy-it
Multimeter
JT-LCR-T7
Lies die bedienungsanleitung für Joy-it JT-LCR-T7 (6 Seiten) kostenlos online; sie gehört zur Kategorie Multimeter. Dieses Handbuch wurde von 74 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 37.5 Bewertungen. Hast du eine Frage zu Joy-it JT-LCR-T7 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/6

www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
MULTI FUNCTIONAL TESTER-
Multi functional measurement device-
1. GENERAL INFORMATION
Dear customer,
thank you for choosing our product. In the following, we will show you how
to use this device.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.

www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. STRUCTURE
Display
Infrared decoder Button
Charging status LED microUSB port
Slots for measuring the
breakdown voltage
Slots for
measuring

www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
3. INITIAL OPERATION
When you start the measuring device for the first time, you should first
perform a self-test of the device. For this purpose, you must short circuit -
the slots 1, 2 and 3. You do this as follows:
Now press Start to perform the self test. You will be asked by the device -
at approx. 22% to remove the component to close the course so that the
self test can be completed successfully. Now you can start measuring -
your components. You start the measuring process with the Start button.
A 3.7 V battery with 350 mAh is built into the multifunction tester. You can
charge it with microUSB and a 5 V power supply. The LED shows the
status of the battery. That means it shines red when the battery is
charging and green when the battery is fully charged.
The battery of this measuring device is also measured during each
component measurement. Therefore, the residual voltage of the battery
is also displayed during each measurement. This residual voltage is
displayed with .Vbat = …V
The device will also tell you when the battery needs to be charged again.
This device switches o automatically aer 20 seconds of inactivity. You
can also turn it o manually by pressing and holding the Start button.
Produktspezifikationen
Marke: | Joy-it |
Kategorie: | Multimeter |
Modell: | JT-LCR-T7 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Joy-it JT-LCR-T7 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Multimeter Joy-it
29 August 2024
28 August 2024
Bedienungsanleitung Multimeter
- Owon
- Maxwell
- Rohde & Schwarz
- Greenlee
- Monacor
- BENNING
- Cosinus
- Gossen Metrawatt
- Horex
- Steren
- Aldi
- Endress+Hauser
- Voltcraft
- Etekcity
- EMOS
Neueste Bedienungsanleitung für -Kategorien-
28 Juli 2025
26 Juli 2025
26 Juli 2025
26 Juli 2025
25 Juli 2025
25 Juli 2025
25 Juli 2025
20 Juli 2025
20 Juli 2025
20 Juli 2025