Joy-it RB-JoyPi-Addon Bedienungsanleitung
Joy-it
Nicht kategorisiert
RB-JoyPi-Addon
Lies die bedienungsanleitung für Joy-it RB-JoyPi-Addon (15 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 15 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 8 Bewertungen. Hast du eine Frage zu Joy-it RB-JoyPi-Addon oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/15
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
JOYPI EXPANSION KIT
RB-JoyPi Addon-
1. GENERAL INFORMATION
Dear Customer,
thank you for choosing our product. In the below, we will show you what
you need to know about commissioning and use of the product.
If you encounter any unexpected problems during use, please feel free to
contact us.
These instructions only refer to the expansion pack for the JoyPi. If you
have any questions about the basic functions of the JoyPi, you can down-
load the main JoyPi manual .here
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
2. ASSEMBLY
First, screw the spacers to the port doubler as seen in the picture below.
Your Raspberry Pi should already be screwed into the JoyPi.
Now you can plug the port doubler onto the Raspberry Pi.
The port doubler is not screwed to the Raspberry Pi, because
the port doubler has to be removed again when you want to
close the JoyPi.
Finally, you only need to connect the GPIO strip of the JoyPi, with the
GPIO strip of the port doubler with the supplied cable.
www.joy it.net-
Pascalstr. 8 47506 Neukirchen Vluyn-
3. INSTALLATION
For the commissioning of the ADC and the pressure and temperature sen-
sor, it is necessary to install the corresponding libraries.
In our prepared image, which you can download , they are already here
installed. If you use your own image, you can install the libraries with the
following commands.
adafruit/Adafruit_CircuitPython_ADS1x15
adafruit/Adafruit_CircuitPython_BMP280
The sample scripts we prepared, are also already present on the image.
You can also download the script directory manually , or save it to here
your desktop with the following commands:
Also, if you are using your own image, you need to enable I2C. To do this,
enter the following command in the terminal:
Now go to 3Interfacing Options I5 I2Cand enable .
sudo pip3 install adafruit circuitpython ads1x15- -
sudo apt get install python3 smbus i2c- - -tools - y
cd Desktop/
wget https://joy pi.net/files/files/downloads/joypi/Joy Pi.zip- -
sudo raspi config-
unzip Joy Pi.zip-
sudo pip3 install adafruit circuitpython bmp280- -
Produktspezifikationen
| Marke: | Joy-it |
| Kategorie: | Nicht kategorisiert |
| Modell: | RB-JoyPi-Addon |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Joy-it RB-JoyPi-Addon benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Joy-it
6 September 2024
5 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
4 September 2024
3 September 2024
3 September 2024
3 September 2024
Bedienungsanleitung Nicht kategorisiert
- StrikeMaster
- Geomag
- Gardena
- Panasonic
- Constructa
- Tenda
- True & Tidy
- Pulse ShowerSpas
- NOCO
- Bricasti Design
- Telstra
- IHome
- Primus
- Egnater
- DivKid
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025
15 Juni 2025