JPL 611-PB Bedienungsanleitung

JPL Headset 611-PB

Lies die bedienungsanleitung für JPL 611-PB (1 Seiten) kostenlos online; sie gehört zur Kategorie Headset. Dieses Handbuch wurde von 5 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 3 Bewertungen. Hast du eine Frage zu JPL 611-PB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/1

Important Safety Instructions

This headset is very easy to use and setup. For optimal use, we still

recommend that you read this user guide carefully before using the

headset for the rst time.

Unpacking

Remove your headset from its packaging and ensure you have the

correct specied accessories. Retain the headset box for storage

of your unit, and also in the event that it needs to be returned for

servicing or repair.

Safety

For your own safety, this product should only be used with CE

ACA and RoHS approved equipment. Using this headset with non

approved equipment can void this products warranty.

Maintenance

To gain optimal performance, hygiene and life-span from your

headset, replace all consumable items; - ear cushions, microphone

foam wind shield (if applicable) every 6 months.

Environmental Notice

This headset has been made to CE, RoHS and WEEE standards.

In the interest of recycling raw materials, please do not dispose

of this headset in the household waste at the end of its useful

life. Disposal can take place at approved recycling or disposing

locations in accordance with local regulations.

Warning

Ensure that all electrical connections (including extension leads

and interconnections between pieces of equipment) are properly

made and in accordance with the relevant manufacturers

instructions.

• Do not continue to operate the equipment if you are in any

doubt about it working normally, or if it is damaged in any way.

Disconnect from your telephone equipment and consult your

dealer.

• Do not allow electrical equipment to be exposed to rain or

moisture.

• Never push anything into holes, slots or any other opening on

your headset as this could result in fatal electrical shock.

• Do not open the headset housing as doing so will void the

warranty.

• Never guess or take chances with electrical equipment.

• Do not use this equipment to report a gas leak while you are in

the vacinity of a gas leak.

• Telephone headsets are capable of producing high levels of

sound. Prolonged exposure to high sound levels can cause

damage to hearing.

• Never allow small children to play with the headset - small parts

may be a choking hazard.

Connecting and using your headset

Does your desk phone have a dedicated headset connection

port?

If it does, simply connect your headset’s cable to your chosen bottom

lead, then connect the bottom lead to the dedicated port on your desk

phone.

If you nd that when the headset is connected to the phone it is not

working as expected then it is very likely you are using an incompatible

bottom lead.

There are various bottom leads available, these are all designed to

connect your headset to specic brands of desk phone, ensuring

whatever your setup, your headset will be compatible.

Please contact your dealer to attain the correct bottom lead for your

desk phone.

What do you do if you want to connect your headset to a PC:

Your headset requires a USB cable. In the event that you do not have this

adapter cable, please contact the supplier of this headset. They will be

able to provide the correct adapter cable for your headset and PC.

Adjusting the Headband

Place the headset receiver to your ear and set the T-bar above your other

ear. Adjust the headband until it is comfortable, ideally ensuring there is

virtually no pressure felt on the ear.

The headset can be worn on either

side. To change the microphone side,

simply rotate the microphone boom

270 degrees to the other side.

Adjusting the Microphone Boom

To avoid low or distorted sound, and to

provide clear and crisp telephone calls, the

microphone should be positioned within

30-40 mm of your mouth.

The microphone boom will move in a variety

of directions to ensure the best t.

Adjusting the Clothing Clip

Your new headset is supplied with a clothing clip to allow comfortable

tting of your headset without the cable getting caught or inadvertently

pulled.

The clothing clip should be fastened at a comfortable level, ensuring

there is suicient slack on the cable allowing free movement of your head

without disturbing the headset position.

In the interests of hygiene it is advisable to replace the ear cushions and

wind shield of your headset every 6 months.

Using the Quick Disconnect Lead (QD)

Your headset is equipped with a Quick Disconnect Lead (QD) allowing you

to move away from your desk (disconnecting the

2 connectors) without losing the call.

To connect the QD on your headset to the QD on the bottom lead, simply

align the two QD’s and push together. To disconnect the QD’s, simply pull

the two QD’s apart.

USER GUIDE

270°

30mm

Clothing Clip

Quick Disconnect

Microphone

Ear Cushion

Adjustable Headband

Optional

Accessory

Bottom Lead

Headset Amplier

REGISTERED ADDRESS

UK Oice: JPL Telecom Limited: Unit 1, Church Close Business Park, Todber, Sturminster Newton, Dorset, DT10 1JH, UK

USA Oice: JPL Telecom Holdings LLC: 445 W Merritt Ave, Merritt Island, FL 32953, USA

www.jpltele.com

2014/30/EU

Produktspezifikationen

Marke:	JPL
Kategorie:	Headset
Modell:	611-PB
USB Anschluss:	Nein
Bluetooth:	Nein
Gewicht:	117 g
Produkttyp:	Kopfhörer
Empfohlene Nutzung:	Büro/Callcenter
Headset-Typ:	Binaural
Tragestil:	Kopfband
Produktfarbe:	Schwarz
3,5-mm-Anschluss:	Nein
Übertragungstechnik:	Kabelgebunden
Position Kopfhörerlautsprecher:	Ohraufliegend
Kopfhörerfrequenz:	100 - 6800 Hz
Impedanz:	150 Ohm
Mikrofon-Typ:	Boom
Schnellstartübersicht:	Ja
Zertifizierung:	UKCA, CE, FCC, EAC, RoHS, REACH
Warentarifnummer (HS):	8518300090
Ursprungsland:	Südkorea
Verpackungsart:	Polybag
Gehäusematerial:	Kunststoff
2 x 3,5 mm Stecker:	Nein
Anzahl:	1
Kopfhörer-Empfindlichkeit:	93 dB
THD, totalklirren:	3 %
Mikrofon-Frequenz:	50 - 20000 Hz
Mikrofon-Empfindlichkeit:	-32 dB
Mikrofon-Eingangsimpedanz:	2200 Ohm
Ausrichtung des integrierten Mikrofons:	Bidirektionales Mikrofon
Klappbares Mikrofon:	Ja
Rauschverhältnis (SNR):	58 dB
Anzahl Produkte pro Versandkarton:	32 Stück(e)
Gewicht Versandkarton:	13000 g
Länge des Versandkartons:	400 mm
Breite des Versandkartons:	570 mm
Höhe des Versandkartons:	360 mm
Kabelfarbe:	Schwarz
Tragetasche:	Ja
Nachhaltigkeitszertifikate:	CE, REACH, RoHS
Ohrenschützer:	Ja
Einstellbares Kopfband:	Ja
6,35-mm-Stecker:	Nein
Größe Ohrpolster:	50 mm
Sprachen des Handbuchs:	Englisch
Gewicht der Tragetasche:	216 g
Material Ohrpolster:	Kunstleder
Volumen Hauptkarton:	82080 cm³
Verpackungstyp Hauptgehäuse (außen):	Box
Stirnbandpolster:	Ja
Mikrofon-Geräuschunterdrückung:	Ja
Kabelclip:	Ja