Juki CP-180 Bedienungsanleitung
Juki
Nähmaschine
CP-180
Lies die bedienungsanleitung für Juki CP-180 (26 Seiten) kostenlos online; sie gehört zur Kategorie Nähmaschine. Dieses Handbuch wurde von 39 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 20 Bewertungen. Hast du eine Frage zu Juki CP-180 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/26
ENGLISH
CP-180
INSTRUCTION MANUAL
No.02
40088353
i
CONTENTS
1. INSTALLING THE CONTROL PANEL ..........................................................................1
2. CONNECTING THE CORD ............................................................................................1
3. CONFIGURATION .........................................................................................................2
4. SETTING PROCEDURE OF THE MACHINE HEAD .....................................................2
5.
ADjUSTING THE MACHINE HEAD(direct-drive motor type sewing machine only)
...3
6. EXPLANATION OF THE CONTROL PANREL ..............................................................4
7.
HOW TO OPERATE THE CONTROL PANEL FOR SEWING STITCHING PATTERNS
...5
8. ONE-TOUCH SETTING .................................................................................................9
9. PRODUCTION SUPPORT FUNCTION .........................................................................9
10. HOW TO USE THE BOBBIN THREAD COUNTER ....................................................12
11. HOW TO USE THE THREAD TRIMMING COUNTER ................................................13
12. NEEDLE UP/DOWN COMPENSATION SWITCH .......................................................13
13. KEY LOCK FUNCTION ...............................................................................................14
14. ON/OFF SWITCH OF THE MATERIAL EDGE SENSOR ......................................14
15. AUTOMATIC THREAD TRIMMING SWITCH .........................................................14
16. ONE-SHOT AUTOMATIC STITCHING SWITCH ...................................................14
17. THREAD TRIMMING PROHIBITION SWITCH ......................................................15
18. FUNCTION SETTING SWITCH ...................................................................................15
19. OPTIONAL INPUT/OUTPUT SETTINGS ....................................................................16
20. AUTOMATIC COMPENSATION OF NEUTRAL POINT OF THE PEDAL SENSOR ...18
21. SETTING OF THE AUTO LIFTER FUNCTION ............................................................18
22. INITIALIzATION OF THE SETTING DATA ..................................................................19
23. CHECKING PROCEDURE OF THE ERROR CODE ...................................................19
- 1 -
1) Remove side plate setscrews 1 from the side plate.
2) Install control panel 2 on the machine head using screws 5, at washers 3 and rubber seat 4 sup-
plied with the control panel as the accessories.
1. INSTALLING THE CONTROL PANEL
< The relation between the respective machine heads and the positions of installing hole of the bracket are as described in the table. >
1 2 3 4 5 6
WARNING :
To prevent personal injury caused by abrupt start of the sewing machine, carry out the work after
turning OFF the power switch and ascertaining that the motor has completely stopped.
WARNING :
This Instruction Manual is for the control panel, CP-180.
Read "Safety Instructions" of the Instruction Manual for the control box carefully beforehand and
understand them before using CP-180.
In addition, be careful not to splash water or oil on it, or shock such as dropping and the like since
this product is a precision instrument.
1. DDL-9000B (Not provided with AK) is given as an example of installing procedure.
2. Screw to install the panel changes according to the machine head used. Refer to Table 1 and
conrm the kind of screw.
Table 1
Installing hole
Screw
DDL-9000A 1 - 5M5 X 12 Screw supplied with panel
as accessories
DDL-9000B 1 - 5
(Provided with AK)
M5 X 14 Side plate setscrew
(Not provided with AK)
M5 X 12
Screw supplied with panel
as accessories
LH-3500A 2 - 5M5 X 14 Side plate setscrew
1) Pass cord 1 of the control panel through hole A
in the machine table route it to the underside of
the table.
2) As for the connection of the connector, refer to
the Instruction Manual for the control box.
2. CONNECTING THE CORD
1
A
1
2
4
5
3
Produktspezifikationen
| Marke: | Juki |
| Kategorie: | Nähmaschine |
| Modell: | CP-180 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Juki CP-180 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nähmaschine Juki
5 Oktober 2024
5 September 2024
29 August 2024
29 August 2024
29 August 2024
29 August 2024
28 August 2024
21 August 2024
21 August 2024
21 August 2024
Bedienungsanleitung Nähmaschine
- SteamMax
- Tristar
- Janome
- Mio Star
- Gritzner
- Dürkopp Adler
- Hofmann
- Brother
- Livoo
- Elna
- Huskystar
- Home Electric
- Lervia
- Union Special
- Łucznik
Neueste Bedienungsanleitung für -Kategorien-
3 August 2025
2 August 2025
29 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025
28 Juli 2025