JUNG A5232ST Bedienungsanleitung
JUNG
Nicht kategorisiert
A5232ST
Lies die bedienungsanleitung für JUNG A5232ST (5 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 14 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 7.5 Bewertungen. Hast du eine Frage zu JUNG A5232ST oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/5
Centre plate with timer function "standard"
Blinds Management
Centre plate with timer function "standard"
Art. No. : .. 5232 ST ..
Operating instructions
1 Safety instructions
Electrical equipment may only be installed and fitted by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or
load. At the same time, take into account all circuit breakers that supply dangerous
voltage to the device or load.
Danger of electric shock. Device is not suitable for disconnection from supply voltage.
These instructions are an integral part of the product, and must remain with the end
customer.
2 Device components
Figure 1: Device components
(1) Venetian blind control
(2) Frame
(3) Cover
1/5
32537613
J:0082537613 21.05.2014
Figure 2: Display and buttons
(4) Current weekday
(5) Operating mode: Manual or Automatic
(6) Current time of day
(7) Buttons
3 Function
Intended use
- Manual and time-controlled operation of electrically-driven Venetian blinds, shutters and
awnings
- Operation on control of the Venetian blind control system
Product characteristics
- Each Up and Down travelling time can be saved for weekdays and for the weekend
- Travelling times programmed at the factory
- Current time of day can be saved as travelling time
- Automatic and manual operation
- Operation via 4 buttons
- Indication of the current time
- Programming without flush-mounted insert possible
- Power reserve > 6 hours
Behaviour after a mains voltage failure
Voltage failure less than 6 hours
- Time and switching times are retained
- Missed travelling times are not performed later
Voltage failure greater than 6 hours
- Time flashes and the manual operating mode is active.
- Time and weekday must be set again
- The travelling times are reset to default setting
Travelling times with the default setting
Movement direction Weekdays Time
up Mo - Fr 7:00
Down Mo - Fr 20:00
2/5
32537613
J:0082537613 21.05.2014
Blinds Management
Centre plate with timer function "standard"
up Sa - Su 9:00
Down Sa - Su 20:00
4 Operation
Moving the Venetian blind
oPress or button between one and three seconds.n o
The Venetian blind moves in the desired direction to the end position or stops when the
button is pressed again.
iIn automatic operation, the Up and Down travelling time programmed for this day is
displayed for about 4 seconds during manual operation.
Adjusting the slats
oPress the or button for less than one second.n o
The slat position changes in the desired direction for as long as the button is pressed.
Changing between automatic and manual operation
oPress button for longer than 1 second.AUTO/MAN
The cover changes the operating mode.
iIn manual operation, no automatic moves are executed.
Setting time and programming travelling times
Figure 3: Programming steps
After the start of programming, the following steps are passed through in succession (figure 3).
A: Enter current time and day.
B: Enter Up and Down travelling time for Mon-Fri.
C: Enter up and down travelling time for Sat-Sun.
oPress the button for longer than 2 seconds.PROG
The programming is started. The value to be changed flashes.
oPress or button to change times. n o
oPress button to save the entered value and to recall the next value (figure 3).Prog
iA long press when setting the minutes causes an adjustment in steps of 5.
iTo cancel the programming, press the button for longer than 2 seconds or do notPROG
press any button for 2 minutes.
3/5
32537613
J:0082537613 21.05.2014
Blinds Management
Centre plate with timer function "standard"
Produktspezifikationen
| Marke: | JUNG |
| Kategorie: | Nicht kategorisiert |
| Modell: | A5232ST |
Brauchst du Hilfe?
Wenn Sie Hilfe mit JUNG A5232ST benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert JUNG
7 Oktober 2024
7 Oktober 2024
5 Oktober 2024
29 September 2024
22 September 2024
22 September 2024
20 September 2024
19 September 2024
19 September 2024
18 September 2024
Bedienungsanleitung Nicht kategorisiert
- BDI
- Nebula
- Kenton
- Rangemaster
- Econ Connect
- SMC
- TEF
- Ultron
- SmartAVI
- T-Rex
- Tryton
- Oppo
- Catit
- Vaude
- Jinbei
Neueste Bedienungsanleitung für -Kategorien-
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025