JUNG LSFTR231PL Bedienungsanleitung

Lies die bedienungsanleitung für JUNG LSFTR231PL (6 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 7 Bewertungen. Hast du eine Frage zu JUNG LSFTR231PL oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Temperature Management Floor heating controller

Ref.-no.: ..FTR 231 ..

Operating Instructions

Floor heating controller

1. Area of application

Used in domestic electrical installations to regulate electrical floor heating

systems and temperature control systems.

2. Function

The floor heating controller consists of two parts:

•Control unit for setting the required floor temperature

•Remote sensor in the floor for monitoring the set temperature

Control unit:

Using the setting knob, set the required temperature for your floor. The

numbers  – 6 on the knob correspond to a temperature range of 10 – 50

°C.

Note the setting instructions from the manufacturer of your floor heating

system.

If the temperature in the floor falls below the temperature you have set,

the control unit requests heat; this state is displayed by the red LED

above the setting knob. You can therefore see if your heating is using

energy.

A range restriction can also be carried out in the setting knob.

The operating state of your floor heating is switched on or off with the

mains switch 0 – I.

You also have the option of programming a temperature reduction via an

external time switch e.g. during the night.

If you have installed this type of time switch, the temperature reduction is

indicated by the green LED above the setting knob. The temperature

reduction is approx. 5 °C.

Example: The temperature set by you on the control unit is 34 °C

(number on dial = 4). This means that the temperature in the floor e.g.

during the night can drop down to 29 °C without your heating switching

itself on.

Stand: Apr-08 240 9090 1

Produktspezifikationen