JVC GY-HC550ESB Bedienungsanleitung
Lies die bedienungsanleitung für JVC GY-HC550ESB (55 Seiten) kostenlos online; sie gehört zur Kategorie Camcorder. Dieses Handbuch wurde von 19 Personen als hilfreich bewertet und erhielt im Schnitt 4.3 Sterne aus 10 Bewertungen. Hast du eine Frage zu JVC GY-HC550ESB oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/55
JVC Camcorder Web API Reference
Version 1.18
JVC KENWOOD Corporation
Page 1
Conditions for the use of this document
Use of this document is permitted only if you agree to the following terms.
JVCKENWOOD CORPORATION SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
JVCKENWOOD CORPORATION HAS NO OBLIGATION TO PROVIDE MAINTENANCE, SUPPORT, UPDATES,
ENHANCEMENTS, OR MODIFICATIONS.
THIS DOCUMENT DESCRIBES APPLICATION PROGRAMMING INTERFACE TO CONTROL JVC CAMERA
RECORDERS VIA NETWORK, AND IT SHALL NOT BE USED FOR ANY OTHER PURPOSE.
Page 2
History
Version Outline
1.00 First release
1.01 Added GY-HM660 to the command table
Added "3.1.15 Set streaming server settings(RTP)" command only GY-HM660.
Added PcrJitter parameter in "3.1.18 Get streaming server settings" and "3.1.19 Set streaming server settings(UDP)" commands.
1.02 Added "3.1.14 Set streaming server settings(RTP)" command for all cameras.
Type "TCP" is eective in "GY-HM650" and "GY-HM660" in command with a streaming type parameter.
Added "Variable Gain" parameter to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-LS300".
1.03 Type "TCP" is eective in "GY-HM650" in command with a streaming type parameter.
Type "UDPN" and "UDPL" are eective in "GY-HM660" in command with a streaming type parameter.
1.04 Supported KY-PZ100 newly.
Added "3.1.3 Set streaming framerate" command for "KY-PZ100".
Added "3.1.6 Available streaming framerate settings" command for "KY-PZ100".
Added "3.4. PTZ Camera Support Command" for "KY-PZ100".
Added "3.5. How to acquire JPEG data" for "KY-PZ100".
1.05 Added "3.1.3 Set streaming framerate" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.1.6 Available streaming framerate settings" command for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.5. How to acquire JPEG data" for "GY-HM200", "GY-LS300", "GY-HM8x0", and "GY-HM660".
Added "3.6. How to use interruptible feedback function" for "GY-HM660".
1.06 Error correction. 2.1.1.
Another client is able to connect while rst client is using API interface.
3.2.2 SessionRenewal command has become obsolete.
Added "3.6. How to use interruptible feedback function" for "GY-HM8x0".
Type "UDPN" and "UDPL" are eective in "GY-HM8x0" in command with a streaming type parameter
of "3.1.7 Available streaming bitrate settings" command.
1.07 Error correction. "3.1.10 Get streaming server settings".
Revised wrong parameters. They are eective to all models.
Error correction. "3.3.6. Set Web Button Event".
Some parameters are not supported on "KY-PZ100".
Added "MasterBlack" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event"
for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "Detail" parameters to "3.3.1 Get Camera Status" and "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "3.4.3 Zoom switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added "3.3.10 Seesaw switch operation" command for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added Gain event "Up1"/"Down1" parameters to "3.3.6 Set Web Event" for "GY-HM8x0", "GY-HM660", and "GY-HM200".
Added target models "GY-HM8x0", "GY-HM660", and "GY-HM200" to MenuStatus of "3.3.1 Get Camera Status"
Added "3.7. How to control tally system" description for "GY-HM8x0", "GY-HM660", "GY-HM200", and "KY-PZ100".
Changed ""3.3.5. Tally lamp control" description correspond to it.
1.08 Added "Serial" parameter to "3.2.1. Get System Information" for "GY-HM660","GY-HM8x0","GY-HM200", and "KY-PZ100".
Added "3.2.6 Get NTP Status","3.2.7 Set NTP Server", and "3,2,8 Set NTP settings" Commands
for "GY-HM660","GY-HM8x0","GY-HM200", and "KY-PZ100".
Supported GY-HM25x newly.
Error correction.
Added "Whb" "Status" parameter to "3.3.1. Get camera status".
Changed "3.3.1. Get camera status". Parameter ("Enable" "Streaming" "On/O") is not eective in "GY-HM200" and "GY-HM25x".
1.09 Added "Serial" parameter to "3.2.1. Get System Information" for "GY-HM650".
Added "3.5. How to acquire JPEG data" for "GY-HM650".
Supported GY-HC900 newly.
1.10 for "GY-HC900" updates as below.
Added some resolution and bitrate parameters to "3.1. Streaming Setting Command".
Added "Smpte2022Fec" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(RTP)".
Added "AdaptiveBitrate" to "3.1.10. Get streaming server settings" and "3.1.14. Set streaming server settings(ZIXI)" .
Added "3.8. Return over IP Command" for "GY-HC900".
Added "Resolution" and "FrameRate" to "3.8.3. GetReturnOverIpServerSettings" and "3.8.4. SetReturnOverIpServerSettings(RTSP/Zixi)".
Added "3.8.3.1. AvailableTypeOfReturnOverIP" and "3.8.3.2. AvailableFrameRateOfReturnOverIP" commands.
Added "IrisBar" parameter to "3.3.7. Set Web Slider Event".
Added "Position(Iris)" parameter "3.3.1. Get camera status".
Added "PCR Mode" to "3.1.10. Get streaming server settings" and "3.1.16. Set streaming server settings(UDP/Zixi/RTP)" .
Added "Overlay" and "Tagging" parameter to 3.2.1. Get System Information.
Error correction. GY-HC900 does not support "Iris PushAuto" of "3.3.6 Set Web Event".
1.11 Supported GY-HC5x0 newly.
Added "3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC5x0".
Added SRT parameter for "GY-HC5x0".
"3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings",
"3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".
Added "PCR Mode" parameter to "3.1.10. Get streaming server settings"
and "3.1.16.Set streaming server settings(UDP/Zixi/RTP)" for GY-HC5x0.
Added "RTMPS" protocol for "GY-HC5x0".
"3.1.7. Available streaming bitrate settings" and "3.1.10. Get streaming server settings"
and "3.1.16. Set streaming server settings(RTMPS)".
1.12 Added "3.2.6. Get NTP Status" and "3.2.7. Set NTP Server" for "GY-HC900".
Added SRT parameter for "GY-HC900".
"3.2.1. Get System Information", "3.1.7. Available streaming bitrate settings",
"3.1.10. Get streaming server settings", and "3.1.18. Set streaming server settings(SRT)".
Added "3.8. Return over IP Command" 30p/25p parameter for "GY-HC5x0".
Added "IrisBar" parameter to "3.3.7. Set Web Slider Event" for "GY-HC5x0".
Added "Position(Iris)" parameter "3.3.1. Get camera status" for "GY-HC5x0".
Added "KA_EN200" parameter to 3.2.1. Get System Information for "GY-HC5x0" and "GY-HC900".
Added "422_60p" and "422_50p" parameters to each available streaming settings
for "GY-HC5x0" and "GY-HC900" when "KA-EN200" is enabled.
"3.1.1. Get streaming settings" and other available settings.
Added "EXT slot information" to "3.3.1. Get camera status" for "GY-HC900".
Page 3
Produktspezifikationen
| Marke: | JVC |
| Kategorie: | Camcorder |
| Modell: | GY-HC550ESB |
Brauchst du Hilfe?
Wenn Sie Hilfe mit JVC GY-HC550ESB benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Camcorder JVC
17 September 2024
31 August 2024
25 August 2024
25 August 2024
23 August 2024
22 August 2024
20 August 2024
14 August 2024
13 August 2024
9 August 2024
Bedienungsanleitung Camcorder
- Insta360
- Trevi
- Coby
- Dragon Touch
- Magellan
- Airis
- Hyundai
- IGet
- Sakar
- Quintezz
- Linksys
- Vtech
- Midland
- Macally
- Canon
Neueste Bedienungsanleitung für -Kategorien-
14 Juni 2025
13 Juni 2025
13 Juni 2025
8 Juni 2025
1 Juni 2025
1 Juni 2025
31 Mai 2025
25 November 2024
25 November 2024
24 November 2024