Kathrein ESO 180 HL Bedienungsanleitung

Lies die bedienungsanleitung für Kathrein ESO 180 HL (4 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 2 Bewertungen. Hast du eine Frage zu Kathrein ESO 180 HL oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1 / 4

ESO 180 H237500004

ESO 180 HL237500006

Refl ector Heating Systems for CAS 180

Features

•Flexible special heating mats with integrated heat insulation

and PTFE insulated heating elements

•Good heat distribution due to an optimal fi t of the heating

mats on the refl ector

•Element carrier of aluminium foil, self-adhesive foil strips at

the front

•Thermal insulation made of bubble wrap with refl ective layer,

4 mm

•Built-in sensor to additionally defi ne the heating temperature

via a control

About These Instructions

This document is part of the product. These instructions

describe how to install and connect the refl ector heating

systems ESO 180 H, and ESO 180 HL.

►Do not install or use the devices until you have read and

understood this document.

►Keep this document for reference throughout the service life

of the devices. Pass this document on to any new owner or

user.

The most up-to-date version of this document can be found at

www.kathrein-ds.com

Scope of Supply

•4 heating mats with 3.5 m cable (H05RNF) and heating

temperature sensor

•Mesh reinforced aluminium foil, 0.05 x 17 m

•Adhesive fi lm (white) for covering the aluminium foil, 0.075 x

17 m

•4 elliptical segments made of white adhesive foil for covering

the outer contours of the heating mats

•8xcable ties, 360 mm

Transport and Storage

►If possible, transport and store the heating mats in their original packaging.

►Protect the heating mats against moisture and mechanical damage.

►Transport and store the heating mats only in the permitted temperature range between -40 and +80°C. Make sure there is no

condensation build-up.

Functional Description

The electric heating prevents snow and ice formation on the antenna refl ector surface which may lead to interruptions in satel-

lite reception. The heating for the antenna consists of four special heating mats with integrated heat insulation and PTFE insulated

heating elements. After installation, the heating mats fi t on the refl ector in an optimum way and guarantee a good heat distribution.

Two of the heating mats have an integrated temperature switch that turns o the heating at 80°C so that the system can be directly

operated at 230 V/50 Hz. To ensure e cient operation, we recommend the use of a control unit for the ESO 180 H. The control unit can

be operated with the built-in sensor, but also without a sensor. Possible system components:

Operation without temperature

sensor

Operation with temperature sensorOperation without control possible

ESO 180 HESO 97 SESO 97 SLYES

ESO 180 HL-ESO 97 SL ESO 99 SA control unit is mandatory for

operating the ESO 180 HL. For this

purpose, the required temperature

sensor is built into the heating mat.

ESO 180 HL: for exposed loca-

tions, with double the heating

power compared to ESO 180 H

(L = increased performance).

Produktspezifikationen