Key Digital KD-X444SP Bedienungsanleitung
Key Digital
Nicht kategorisiert
KD-X444SP
Lies die bedienungsanleitung für Key Digital KD-X444SP (13 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 23 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 12 Bewertungen. Hast du eine Frage zu Key Digital KD-X444SP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/13
521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com
1
4K 18G HDMI over 50m CAT5e/6 Extender Set
with HDR, Power over Cat, IR or RS-232
521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com
Rev 1 Jul, 2 1. –202
2
Table of Contents
About -X444SP 3 KD
Application Diagram 4
Quick Connection Guide 5
Connections, LEDs, Rotaries & Switches 6
Rack Mounting 11
Specications 11
Product Warnings & Safety Instructions 12
Operation Manual
Please visit www.keydigital.com for the latest product documentation,
rmware, control drivers and software downloads. Product features and
specications are subject to change without notice
Always follow the instructions provided in this Operation Manual.
521 East 3rd Street Mt. Vernon, NY 10553 • www.keydigital.com
Rev 1 Jul, 2 1. –202
3
About KD-X444SP
Key Digital® KD-X444SP is a 4K/UHD 18Gbps, HDCP2.2 compliant HDMI over CAT5e/6 Transmitter plus
Receiver set for extension of digital video signals with the latest standards in resolution, HDR, and Chroma
over a single CAT cable.
KD-X444SP extends video resolutions up to 4096x2160 at 60hz with 4:4:4 chroma sub-sampling over a
single CAT5e/6 cable up to 164ft (50m).
In addition to HDMI AV, KD-X444SP carries IR or RS-232 for controlling remotely located equipment. An IR
sensor and IR emitter are included, and the Tx unit’s IR Input port supports Serial IR input directly from a
control system / IR block. With Power over CAT (PoC), only one power supply is needed, and it may be
connected at either unit for ease of installation.
KD-X444SP features Key Digital’s proprietary Full Buffer Technology software suite, with EDID handshake
management, fixed hot plug detection, HDCP authentication to the connected source, and TMDS signal re-
clocking for installation with long cabling or many connectivity layers.
Key Features
• Single CAT5e/6 UTP/STP Extension: Fully automatic equalization, and amplication depending on
cabling length.
• 4K Resolution Support: 4096x2160 or 3840x2160 24/25/30/60hz at 4:4:4 (signals up to 18Gbps
bandwidth).
• Flexible Power over CAT (PoC): Only one power connection needed. Tx may power Rx, or Rx may
power Tx.
• Visually Lossless Compression: 18G enabling technology applied to all video formats exceeding
10.2Gbps to accommodate transmission channel.
• Low Prole: Super slim chassis design.
• Signal Extension via CAT5e/6:
o 4K/UHD (18G) and 1080p: Up to ft / m 164 50
• 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension.
• HDR10 (High Dynamic Range): More life-like images through a greater range of luminance.
• HDCP 2.2: Compliancy up to HDCP 2.x and backward compliant
• Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit
• IR Sensor: Sensor powering via +5V on IR In ports collects line- -sight IR from remote(s) without of
external IR connecting block.
• Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and
Rx units.
Produktspezifikationen
| Marke: | Key Digital |
| Kategorie: | Nicht kategorisiert |
| Modell: | KD-X444SP |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Key Digital KD-X444SP benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Nicht kategorisiert Key Digital
8 Juni 2025
7 Juni 2025
26 August 2024
26 August 2024
11 April 2024
19 Dezember 2023
Bedienungsanleitung Nicht kategorisiert
- Wolff Finnhaus
- Winston
- Dash
- ProDAD
- Sachtler
- XYZprinting
- Challenge Xtreme
- Astell&Kern
- RAVPower
- Skymaster
- X-Sense
- Mamas & Papas
- MBZ
- DeWalt
- JL Cooper
Neueste Bedienungsanleitung für -Kategorien-
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025