Kicker CXA1200.1 Bedienungsanleitung
Lies die bedienungsanleitung für Kicker CXA1200.1 (28 Seiten) kostenlos online; sie gehört zur Kategorie Empfänger. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 1.5 Bewertungen. Hast du eine Frage zu Kicker CXA1200.1 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/28
CX SERIES MONO AMPLIFIERS
CXA300.1 | CXA600.1 | CXA1200.1 | CXA1800.1
Owner’s Manual | English
Manual del Propietario | Español
AMPLIFICADOR DEL LA SERIE CX.1
Benutzerhandbuch | Deutsch
MONOVERSTÄRKER DER CX.1-SERIE
Manuel d’utilisation | Française
AMPLIFICATEUR DE SÉRIE CX.1
CX
Amplifiers
2016 CXA Mono Amps Rev F.indd 12016 CXA Mono Amps Rev F.indd 1 9/24/2015 4:30:42 PM9/24/2015 4:30:42 PM
2
CX.1-SERIES AMPLIFIERS
OWNER’S MANUAL
INSTALLATION
Mounting: Choose a structurally sound location to mount your KICKER amplifi er. Make sure there are no items
behind the area where the screws will be driven. Choose a location that allows at least 4” (10cm) of open
ventilation for the amplifi er. If possible, mount the amplifi er in the climate-controlled passenger compartment. Drill
four holes using a 7/64” (3mm) bit and use the supplied #8 screws to mount the amplifi er.
The KICKER CX Amplifi ers are capable of space-saving vertical mounting. Use a 2.5mm hex key (Allen wrench)
to loosen the end panel, remove the existing brackets, then insert and tighten the double-slotted brackets to the
amplifi er as illustrated on the next page.
PERFORMANCE
Authorized KICKER Dealer:
Purchase Date:
Model Number:
Serial Number:
Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use
genuine KICKER accessories and wiring.
MODEL: CXA300.1 | CXA600.1
CXA1200.1 | CXA1800.1
Model: CXA300.1 CXA600.1 CXA1200.1 CXA1800.1
RMS Power [Watts]
@ 14.4V, 4Ω mono, ≤ 1% THD+N
@ 14.4V, 2Ω mono, ≤ 1% THD+N
150W x 1
300W x 1
300W x 1
600W x 1
600W x 1
1200W x 1
900W x 1
1800W x 1
Length [in, cm] 8-1/8, 21 8-1/8, 21 12-1/16, 31 13-5/8, 34.6
Specifi cations common to all models:
Height [in, cm] 2-3/8, 6
Width [in, cm] 7-3/16, 18
Frequency Response [Hz] 25–200
Signal-to-Noise Ratio [dB] >95, A-weighted, re: rated power
Input Sensitivity Low Level: 125mV–5V
High Level: 250mV–10V
Electronic Crossover Variable Lo-pass 50Hz–200Hz, 12dB/octave
KickEQ™ Bass Boost Variable 0–12dB @ 40Hz
Subsonic Filter 25Hz, 24dB/octave
Remote Bass Yes (sold separately)
WARNING: KICKER products are capable of producing sound levels that can permanently damage your hearing! Turning up a
system to a level that has audible distortion is more damaging to your ears than listening to an undistorted system at the same
volume level. The threshold of pain is always an indicator that the sound level is too loud and may permanently damage your
hearing. Please use common sense when controlling volume.
2016 CXA Mono Amps Rev F.indd 22016 CXA Mono Amps Rev F.indd 2 9/24/2015 4:30:48 PM9/24/2015 4:30:48 PM
Produktspezifikationen
| Marke: | Kicker |
| Kategorie: | Empfänger |
| Modell: | CXA1200.1 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Kicker CXA1200.1 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Empfänger Kicker
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
18 Juni 2025
17 Juni 2025
30 November 2024
30 November 2024
30 November 2024
30 November 2024
Bedienungsanleitung Empfänger
- LogiLink
- Line 6
- Xtrend
- MX Onda
- Cabasse
- Audison
- Pyle Pro
- Whirlwind
- Hughes & Kettner
- Cloud
- FSR
- Ibiza Sound
- DIO
- Wet Sounds
- Tesla
Neueste Bedienungsanleitung für -Kategorien-
18 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
17 Juni 2025
16 Juni 2025
16 Juni 2025
16 Juni 2025
15 Juni 2025