Kirk BH-3 Bedienungsanleitung
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Kirk BH-3 (1 Seiten) in der Kategorie Stativ. Dieser Bedienungsanleitung war fĂŒr 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.9 Sternen bewertet
Seite 1/1
Your variable tension knob is the small knob on the opposite
side of your main lock knob. To set the tension, you will need to
ïŹrst tighten the main lock knob tight ( ). Then tighten your Fig. 1
tension knob tight ( ). Remember clockwise to tighten and Fig. 2
counter-clockwise to loosen. Now you will need to loosen your
main lock knob all the way ( ). Now start to loosen your Fig. 3
tension knob ( ) until the amount of desired tension is set. Fig. 4
At this point all you will have to do its loosen and tighten the
main lock knob. If more tension is needed, simply tighten the
tension knob. And if less is needed, just loosen the knob.
Figure 1 Figure 2
Figure 3 Figure 4
The last knob is for your panning
base. This knob will lock the head
from rotating 360 degrees. Simply
turn the knob clockwise to
tighten and counterclockwise
to loosen. ( )Fig. 5
If you have any questions please call 260-665-3670
For custom mounting plates and ball head accessories,
please visit our website www.KirkPhoto.com
All knobs are captive, do not remove.
We recommend cleaning your head
every 4-6 weeks. To do this, loosen the
main control knob and the tension knob.
Move the ball into the 90 degree position.
Now with a cloth lightly moistened with
WD40 slowly turn the ball in the socket.
When youâre done with this process please
wipe off any excess WD40 with a clean
cloth. Also please avoid using any cleaner
other than WD40 and do not spray WD40 directly onto the
ball. You can purchase WD40 at your local hardware or
automotive store.
Figure 5
DIRECTIONS FOR KIRK
BH SERIES BALL HEADS
Congratulations on your purchase of your new
ball head. Using your new head is very simple.
Your ball head has three control knobs. Your main lock
knob is the largest of the three. To use this knob, simply
turn clockwise to tighten. To loosen, turn counter-clockwise
while applying a slight inward pressure.
Main Lock
Knob
Variable Tension
Knob
Panning Base
Knob
www.KirkPhoto.com
333 Hoosier Drive
Angola, IN 46703-9336
800-626-5074 âą 260-665-3670
KirkPhoto@aol.com
Our Science Will Improve Your Art.
The Kirk-Manufactured Product Warranty
The quality of every product manufactured by Kirk Enterprises
is fully guaranteed to the original owner for ïŹve years from
purchase date. If a Kirk-manufactured product fails because
of a manufacturing or material defect, we will repair it or
replace it at our option.
Please call Kirk Customer Support at 260-665-3670
Monday through Friday before returning any product.
Manufacturerâs Warranties & Repairs
All products sold by Kirk Enterprises carry the full
Manufacturerâs Warranty, including those specially
modiïŹed by Kirk, such as certain tripods and ball heads.
Call Kirk Customer Support at 260-665-3670
Monday through Friday for more information.
Produktspezifikationen
| Marke: | Kirk |
| Kategorie: | Stativ |
| Modell: | BH-3 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Kirk BH-3 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Stativ Kirk
10 Juni 2025
Bedienungsanleitung Stativ
- Stativ Laserliner
- Stativ Magnus
- Stativ Tiltall
- Stativ Benro
- Stativ DJI
- Stativ Proaim
- Stativ Sky-Watcher
- Stativ Sony
- Stativ Robus
- Stativ Dörr
- Stativ Moza
- Stativ MOVE'N SEE
- Stativ Kodak
- Stativ Hohem
- Stativ Levenhuk
Neueste Bedienungsanleitung fĂŒr -Kategorien-
10 Juni 2025
9 Juni 2025
9 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025
8 Juni 2025