KJB Security Products DVR290 Bedienungsanleitung

Lies die bedienungsanleitung für KJB Security Products DVR290 (2 Seiten) kostenlos online; sie gehört zur Kategorie Sicherheitskamera. Dieses Handbuch wurde von 7 Personen als hilfreich bewertet und erhielt im Schnitt 3.7 Sterne aus 4 Bewertungen. Hast du eine Frage zu KJB Security Products DVR290 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

User Manual

Product structure

Operation Guide

Charge the battery:

The product has an internal, rechargeable battery; please charge the battery when you use it in the first time. The batterycan be

recharged bythe following ways:

1)By connecting to PC.Make the attached USB cable pluginto the computer USB port, then canbe recharged.

2)By battery charger. Put the product with USBcable into an Electrical outletwith a USB port, then can be charged.

Duringcharging, the GREEN indicator will blink, when the battery’s power is full, the BLUE indicator keeps on.

Note: when the battery’s power is low, the blueindicator will blink for seconds, and then the product will shut down automatically.

Please charge the product immediately.

Turn your producton and recording:

Clickthe Record/Stop button for about 3 seconds, the blue light will turn on, the product will be in preparing state, and thenthe

yellowlight will turn on and flash slowly, to start recording video and sound recordings, the yellowlight will flash slowly 10 times and

then off to continue recording.

To obtain perfect video, please place the product under enough illumination. Keep the product toward the target, and at least

50cm fromthe target. .

If the continuousrecording time is over 70~90 minutes, the product will save the current recording data, and thenrestart the

video recordautomatically.

Stop & Continue Recording:

When the videocontinue (indicator light do not blink), click the Record/Stop button once can stop the video, the blue lights will

be back to keeps light on status with standby mode; push the button once again to continue video record.

Turn your product off:

Whateverthe product is under recording or stand-bymode, press and holds the Record/Stop button for about 3 secondsto

turn off the power, the indicators will flash quickly 5 times and then go off.

Connecting to PC：

When the product is in Standby Mode or shut down it means the indicator off or the blue light keeps on, you can insert the

product into the USB port of computer.Please do not connect the product to computerduring video recording or photo taking.

Insertthedevice to the USB port of a computer. After a while,a removable disk symbol will appear on thecomputer screen. The

GREENlight will twinkle (charging battery), or the BLUE light will keep on (battery power is full).When take out the product, please

click on a removable disk symbol on the right corner, unloading the removable disk,let the system make sure you can pull out safety

then disconnect products and computer connection.

Note: when connect to PC, if no response in 30 seconds after connected, please disconnect the product, and reconnect again.

Function as a removable disk:

When connect the product to PC,you cancopy, move, or delete files.

Note: It is highly recommended to copy the recorded video files into the hard disk of computer, and then to playback. Because of

large amount of dataflow, directly playback the video files stored in the built-in memorymay cause theplayback not smoothly.

Produktspezifikationen