König CMP-BLUEHS20 Bedienungsanleitung

König Kopfhörer CMP-BLUEHS20

Lies die bedienungsanleitung für König CMP-BLUEHS20 (58 Seiten) kostenlos online; sie gehört zur Kategorie Kopfhörer. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.2 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu König CMP-BLUEHS20 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/58

CMP-BLUEHS20

MANUAL (p. 2)

Stereo Bluetooth Design Headset

MODE D’EMPLOI (p. 10)

Casque Stéréo Bluetooth® Design

MANUALE (p. 18)

Cuffia stereo Bluetooth®

BRUKSANVISNING (s. 34)

Stereo Bluetooth® Designheadset

MANUAL DE UTILIZARE (p. 42)

Headset Design stereo cu Bluetooth®

BRUGERVEJLEDNING (p. 50)

Stereo Bluetooth® Design Headset

HASZNÁLATI ÚTMUTATÓ (o. 26.)

Sztereo Bluetooth® design headset

KÄYTTÖOHJE (s. 30)

Muotoillut Bluetooth®-stereokuulokkeet

ANLEITUNG (s. 6)

Stereo Bluetooth® Design Kopfhörer

GEBRUIKSAANWIJZING (p. 14)

Stereo Bluetooth® Design Hoofdtelefoon

MANUAL DE USO (p. 22)

Auriculares Estéreo de diseño Bluetooth ®

NÁVOD K POUŽITÍ (s. 38)

Bluetooth® stereo sluchátka Design s

mikrofonem

ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 46)

Στερεοφωνικά Ακουστικά Bluetooth®

VEILEDNING (p. 54)

Stereo Bluetooth® design-hodesett

ENGLISH

Charging the headset

Before using for the rst time, please charge the battery for a minimum of 4 hours. Repeat this three times.

You can charge the headset with the USB cable. When the red light is on, the headset is charging. When the

red light is off, the battery of the headset is full.

When you hear three warning tones every 30 seconds and the red LED blinks two times, it means the battery

power is low and the battery needs to be charged.

Overview

1.) retractable string

2.) < key: last song

3.) > key: next song

4.) LED indicator

5.) multifunction button (MFB): switch the headset on/off, answer, end, and reject call, mute microphone,

voice dial and voice transfer, redial last number, pause and play

6.) + key: volume up

7.) – key: volume down

8.) charging port

9.) built-in microphone

Usage of the CMP-BLUEHS20

1. Switching the headset on/off

Function Operation LED indicator Indication tone

Switch on the headset Press O the for 3-5 seconds,

and release until the blue LED

blinks

The blue LED blinks quicklin

every 4 seconds4s a time

One tone

Switch off the headset Press O the for 3-5 seconds,

and release until the red LED

blinks

The red LED blinks quickly in

every 4 seconds4s a time

One tone

Remarks:

* The headset will switch off automatically if no device is connected after 5 minutes in order to save power.

2. Pairing the headset with Bluetooth devices

2.1. How to enter the pairing mode

Function Operation LED indicator Indication tone

Enter into pairing

mode

First, make sure the headset

is off. Press O for 5-7 seconds

and release until the red and

blue LEDs blink alternately

The red and blue LEDs blink

alternately

Two tones

Note:

* The pairing mode will last 2 minutes. If the headset still cannot pair with any Bluetooth devices, it will

automatically switch into standby mode.

2.2. Pairing the headset with a Bluetooth mobile phone

Please make sure your mobile phone has a Bluetooth function.

Specic pairing procedures may vary with different mobile phones. Please refer to your mobile phones’

manual for further information. The steps are as follows:

a. Please keep the headset and mobile phone within 1 metre of each other when pairing

b. Make the headset enter the pairing mode (please refer to 2.1)

c. Switch on the Bluetooth function of the mobile phone and search for Bluetooth devices. When the search

is completed, select the headset in the Bluetooth device list.

d. When prompted, enter PIN No: “0000” as the password and press “Yes” or “Confirm”.

e. After pairing the devices successfully, select the headset in the Bluetooth device list and press “Connect”.

f. If the connection is successful, the blue (or red) LED of the headset blinks twice every 4 seconds.

Note:

* If the pairing is not successful, please switch off headset rst then try to pair them again according to the

steps mentioned above.

* After pairing, the devices will remember each other.

* The headset will connect with the last paired device. If you want to pair it with other Bluetooth devices,

please switch off the Bluetooth function of the current Bluetooth device, then pair and connect the new

Bluetooth device according to steps mentioned above.

3. Pairing the headset with a Bluetooth transmitter

You can enjoy music wirelessly by connecting the headset with a stereo Bluetooth transmitter. See the

manual of your transmitter for more details.

4. Making a call with the headset

Function Status of the headset Operation Indicator tone

Voice dial Standby mode Press O for 2 seconds

and release until a tone is

heard

A long tone

Redial last number Standby mode Briey press O twice A long tone

Volume up Conversation mode Briey press + and then

release (or hold) it

None

Volume down Conversation mode Briey press – and then

release (or hold) it

None

Answer call Ringing Briefy press OA short tone

Reject call Ringing Press O for 2 seconds

and release until a tone is

heard

A short tone

End call Conversation mode Briey press OA short tone

Switch conversation

between headset and

mobile phone

Conversation mode Press O for 2 seconds

and release until a tone is

heard

A short tone

Produktspezifikationen

Marke:	König
Kategorie:	Kopfhörer
Modell:	CMP-BLUEHS20
Bluetooth-Profile:	A2DP, AVRCP, HFP, HSP
Gewicht:	106 g
Produkttyp:	Kopfhörer
Übertragungstechnik:	Kabellos
Position Kopfhörerlautsprecher:	Ohraufliegend
Kopfhörerfrequenz:	20 - 20000 Hz
Impedanz:	- Ohm
Kabellose Reichweite:	10 m
Gesprächszeit:	10 h
Kontinuierliche Audiowiedergabezeit:	8 h