Koss TWS150i Bedienungsanleitung

Lies die bedienungsanleitung für Koss TWS150i (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 35 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu Koss TWS150i oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Method 1

Method 2

1. Charging case with battery life status lights

2. USB charging port

3. Earbud status light

4. Touch strip

5. Voice mic

6. Acoustical vent hole

7. L/R indicator

8. Magnetic charging contacts

Included

E Cushisaron

Esarbud

Charging Cable

Chargieng Cas

Inusstrction

Start

Pr Onowe

MoilhoneanHeadhonebe Ps d ps

Pairing

Bluetooth Off

Answer Call

ConnectLoion stFactory Reset

Incoming call

End Call

Pay ause/Pl

Music

Reject Call:

Out of Connection Range

Open the charging case, the white lights will illuminate for 1 second.

The earbuds will automatically power on.

Earbuds Charging

Charging

Place e eas icharging ce.thrbudn e thas

Chngargi: The left and right lights of the charging case will flash

Fuy ar: No charging case s are idllchgedlightillumnate

Charging Case Light Language

LED statuwhes n the chainrgg case is chainrgg

LED statuwhes n chainrgg case is not chainrgg

Whn ethe power is below 30%, the left light flasesh.

Whn ethe power is60 30%~%, the left lialwys ght is aon

and the center light flashes.

Whn ethe power is greater than 60%, the left a cendnter

litsgh are alwysa on and the rit ght lighfhlases.

When the po 100%, wer isall 3 litsgh remain on.

Safety and Care

Hold for 2 seconds

<10%

10%~30%

30%~60%

70%~100%

Whn ethe werpo is below 10%, the left lit ghfhlases.

Whn ethe werpo is 10%~30%, the ft lelight is on.

When the power is 30%~60%, thfe let a cendnter litsgh are on.

Whe n poweris 70%~00%,1 all 3 litsgh remain on.

LED Status When the Charging Case Charges

the Earbuds

The L side charging case light slowly flashes when the L earbud is charging.

The R side charging case light slowly flashes when the R earbud is charging.

When L and R earbuds are charged at the same time, the L and R charging

case lights slowly flash at the same time.

When the earbud’s batteries are full, the charging case lights

will indicate the battery power level for 5 seconds.

<30%

30%~60%

>60%

100%

Using earbuds at high volumes for extended periods of time may result in

permanent hearing damage. It is advised you keep volume levels moderate

Model: 702334, 3.7V, 500mAh

GOLDEN CEL BATTERY CO. LTD.

Yinhu Industrial Park, Jiaoyitang Management Zone

Tngxia Town, Dongguan City, Guangzhou Province

to low at all times for your safety.

Do not use while driving a car, cycling, operating machinery, or performing other

activities that require hearing surrounding sounds.

Earbuds may not work properly under high temperature or high humidity conditions.

Do not use any corrosive cleaner/oil to clean the earbuds.

If the earbuds come in contact with liquids, quickly wipe away .If submerged in

water, do not turn the earbuds on until completely dried.

Tips: liquid submersion voids the warranty.

Keep the earbuds and packaging out of reach of children.

* Do t da, ske, sh or t e ry io fire. Do t exse noisssleembtricruputhbattentnopo

thttconductmaterqumperatue baery to ive ia, lilsids, fire, or high teres.

* Do t aow l es to h e two les of e ry. Do t nollmetaobjcttoucthpothbatteno

contnuthbattehabucooratonodoranie to use e ry if it s lges, leaks, disli, s, or y

othebnormar ality.

* Do t use e ry r it s n submerged in water. nothbatteaftehabee

* If e ry is used irly, it may exple or , ng s d thbattempoperodleakcausiburnan

otheonanjurthbatthoucafupor persl iies. If e ery leaks, it sld be rellisy dsed of

accothocaanguatonconcrnrding to e ll ws lad relis ein

g ry dsal.batteispo

FCarnC Wing

- Reorient or relocate the receiving antenna

- Increase the separation between the equipment and receiver

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected

- iaConthperencerado/technsult e dealer or an exid iTV icn r lp. The fohe

device s en evald to et l RF sure rir. The habeuatemegeneraexpoequement

device n be used in rle sure ition wit resii.capotabexpocondthoutrcton

FCC RF exposure statement:

The it es with C iion exsure mit set rth r equpmencompliFCRadatpolifofo

uncontonmntThequpmenhoulanoperteroed enrllvie. is it sd be insted alld ad

wiisth minim dmutanc0cbetweethradatoanoubode 2m n e ir d yr y.

Battery warning!

Double-tap

Double-tap on the L/R

touch sip.tr

Long hold eth L/R touch sip r 2 ss.trfoecond

Double-tap on the

L/R

touch sip.tr

Power Off

Pce lathrbudntthe eas io e charging case and closed the lid

to aiy wer down earbuds.utomatcallpo

Product Overview

5

4

3

7

8

6

Pothe ft s beinhe wer on let and righearbudas descrid t

“Po Othid wern” poon of rtiis gue.

Fiselectetlistnd nd a "KOSS TWS150i" in thelu Booh t.

NOTE:

1. e the s utothe tWhn poweris on, earbudwill a-connect with las

cd d hi Ith, onnecteevicewitn 10 seconds.f e connection fails

the s n e earbudwill eter pairingmod.

2.the tany,h l If earectebuds aret c noonnd o device teywil

aut turaf is omaticallyn off ter10 mnute

Next Track

Hold the right earbud touch strip for 2s

Hold the left earbud touch strip for 2s

Note: This function is not supported

when L earbuds are used alone.

Previous Track

Dthetchpau inouble tap L/R earbud ou stri to pselay sic/pmu

stay r sic ndbomumode.

Whd:ndghumonondilese pau Iicator litsill inate ce every 5 secs

Whng: ndghumonondilelayi pIicator litsill inate ce every 5 secs

Dpouble-ta

R

L

Specs

1. Bluetooth Version：Bluetooth V5.0

2. Input Power：5.0V 380mA

3. Charging time：< 2h

KOSS TWS150i

0：35

While earbuds are in an off state, touch and hold the touch strip of

both earbuds for about 3 seconds, lights will illuminate for 1 second

to show the earbuds are powered on.

* Protective film must be removed from earbuds

before they can be powered on and paired

Problem: If Bluetooth on source device is turned off, the earbuds will

automatically turn off after 10 minutes. If earbuds are disconnected, the

L/R earbuds’ red and white lights will flash alternately.

1. Open the lid of the charging case and allow both earphones to power

on.

2. While the earphones are in the charging case, tap the touch surface of

either the left or right earphone 3 times and allow both earphones to

power off. NOTE: Tap the touch surface of the earphone 3 times in

less than 1 second.

3. Remove both earphones from the charging case and close the lid.

4. Press and hold the touch surface of either the left or right earphone

until the LED flashes red 3 times (about 10 seconds).

5. Perform Step 4 with the opposite earphone.

6. Open the lid of the charging case and return both earphones. Close

the lid.

7. Factory reset complete.

Solution: Make sure that the source device’s Bluetooth is turned on; then

power on earbuds again.

Problem: If the connection between the device and the earbuds exceeds

the effective range, the earbuds will power off automatically after 10

minutes.

Solution: Make sure that device is in range, then power on earbuds.

TWS150i TRUE WIRELESS EARBUDS

INSRUIONTCTS

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates uses and can radiate radio frequency energy

and. if not installed and used in accordance with the instructions may cause harmful

interference to radio communications, however, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

Produktspezifikationen