Kramer EXT3-H-R Bedienungsanleitung

Lies die bedienungsanleitung für Kramer EXT3-H-R (4 Seiten) kostenlos online; sie gehört zur Kategorie Audio-/Video-Extender. Dieses Handbuch wurde von 31 Personen als hilfreich bewertet und erhielt im Schnitt 4.9 Sterne aus 9 Bewertungen. Hast du eine Frage zu Kramer EXT3-H-R oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

EXT3-H--H-T / EXT3R Quick Start

P/N:

2900-301805QS

Rev:

3

scan to go to website

EXT3-H--H-R T / EXT3Quick Start Guide

This guide helps you install and use your EXT3-H-T / EXT3-H-R for the first time.

Go to http://www.kramerav.com/downloads/EXT3-H-T / http://www.kramerav.com/downloads/EXT3-H-R

to download the latest user manual and check if firmware upgrades are available.

Step 1: Check what’s in the box

EXT3-H-T Transmitter

/

EXT3-H-R Receiver

1 Bracket set

4 Rubber feet

1 Power adapter and cord

1 Quick start guide

Step 2: EXT3-H-T Get to know your

# ction FeatureFun

1

IN LED

Lights blue when an active source device input signal is detected.

2 OUTLED Lightsblue when an active, far- endsink (acceptor) connection is detected via the

HDBT link.

3

LINK LED

Lights green when an HDBT link is established with the HDBaseT receiver.

4

ON LED

Lights green when the device receives power.

5

HDBT OUT RJ- 45Connector

Connect to a receiver (for example, EXT3-H- R).

6

HDMI IN Connector

Connect to an HDMI source.

7

RS- 232(G, Rx, Tx) 3- pinTerminal

Block Connector

This port has two functions selectable by the SETUP DIP- switches:

1. To send/receive RS- 232data over the HDBaseT link.

2. For FW Upgrade.

8

IR 3.5mm Mini Jack Connector

Connect to an external infrared emitter / sensor. The IR signal is passed over the

HDBaseT link.

9

SETUP DIP-switches

Set the operation DIP- switches.Refer to Dip Switch Settingson page 3.

10

12V DC Power Connector

12V DC connector for powering the unit.

Produktspezifikationen