Kramer SID-DP Bedienungsanleitung

Lies die bedienungsanleitung für Kramer SID-DP (2 Seiten) kostenlos online; sie gehört zur Kategorie AV extender. Dieses Handbuch wurde von 31 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 2 Bewertungen. Hast du eine Frage zu Kramer SID-DP oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

The Kramer SID- DisplayPort Step-In Commander DP

Congratulations on purchasing your Kramer DigiTOOLS

® SID-DP DisplayPort Step-In

Commander which is ideal for boardrooms and presentation rooms.

The Kramer is an HDCP compliant DisplayPort and unbalanced stereo audio SID-DP

remote device that used to remotely take control of a compatible switcher, for is

example, the Kramer . The commander does not need a power adapter if VP-81SID

located within 50m (ft) of the switcher. 164

Figure 1Table 1 and define the . SID- DP DisplayPort Step-In Commander

Figure 1SID- DisplayPort Step-In Commander Front and Rear Panel : DP

Table 1SID- DisplayPort Step-In Commander Front and Rear Panel Features : DP

#

Feature

Function

1

AUDIO INPUT 3.5mm Mini Jack

Connect to the unbalanced stereo audio source

2

DP INPUT DisplayPort Connector

Connect to the video source DP

3

STEP Button IN

Press to switch the input to this remote control commanderThe .

button lights when active

4

ONLED

Lights green when the unit receives power

5

LINE OUTTwisted Pair RJ-45

Connector

Connect to the TP input of compatible switcher (for example, the a

VP-81SID) using CAT 6 or higher specification cable

6

Remote Switch Terminal Block

Connections (pins 2 and 3)

Connect to the remote step-in switch

7

12V DC Power Connector

Connect to the power adapter

8

Remote LED Terminal Block

Connections (pins 1 and 2)

Connect to the remote LED (observe correct polarity, pin 1 to the

LED anode and pin 3 to the cathode)

Figure 2 illustrates how to connect the to a sourceswitcher, and remote switch SID-DP ,

and LED.

Figure 2SID- Wiring Connections : DP

To connect the SID- as illustrated in : DPFigure 2

1. Connect the DP video source (for example, a laptop graphics sourceto the )

DisplayPort connector on the front panel of the . SID-DP

2. Connect the unbalanced stereo audio source (for example, a laptop graphics source)

to the 3.5mm mini jack AUDIO INPUT connector on the front of the SID-DP.

3. Using STP cable, connect the LINE OUT RJ-TP connector on the rear panel of 45

the to the required input on the rear panel of the (up to 50m SID-DP VP-81SID

away).

4. OptionalConnect the terminal block on the rear of the to the remote —S-ID DP

switch and LED.

Note: The LED supply includes a current limiting resistor and is designed to work

with any standard LED.

5. Connect the power adapter to the 12V DC connector on the rear of the and SID-DP

to the mains electricity (if the distance exceeds 50m (ft) from the switcher). 164

Produktspezifikationen