Kuzco Nevis EW7918 Bedienungsanleitung

Lies die bedienungsanleitung für Kuzco Nevis EW7918 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 3 Bewertungen. Hast du eine Frage zu Kuzco Nevis EW7918 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

2b.

2a.

1b.

1a.

1d.

1c.

19054 28th Avenue Surrey, BC Canada V3S 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

20170317

Remove the fixture from its original packaging. Remove the

mounting plate from within the canopy backplate (1c)(2b)

by loosening the two set screws . Attach the mounting (2a)

plate (1c) to the electrical junction box (1a), using the two

screws (1d) provided in the hardware package.

Attach the canopy to the mounting plate , which is (2b)(1c)

attached to the electrical junction box on the wall. (1a)

First attach all wiring with the provided marettes (1b)

(white to white “N”, black to black “L”, ground to ground

“G”). Now push the canopy onto the mounting plate (2b)

(1c) (2a) and secure with the two set screws using the

allen key provided.

You have now completed the installation of your fixture,

enjoy.

INSTALLATION SHEET

EW7918

LED Exterior Wall Sconce

START FROM HERE

•

Make sure power is completely off at the fuse box.

•

Have your fixture installed by a qualified licensed electrician

•

Prepare everything in a clear area.

•

Wear gloves at all times during this installation.

•

Read instructions carefully before you start assembly.

•

Keep this instruction sheet for future reference.

Technical Support: 1-877-452-6858

Please Note:

•All Kuzco LED fixtures come with pre-wired LED module(s).

• Unless instructed to do so, please do not touch any part of the LED module(s) as any

unnecessary contact with the module could cause permanent damage.

• For dimming, an ELV (Electronic Low Voltage) type of dimmer is required.

1.

2.

3.

Illustration 1.

To prevent moisture from entering the outlet box and

causing a short, seal around the top and side perimeter

between the fixture and the wall surface with weather

resistant caulking (). The space at see illustration 1

bottom should be left un-caulked to prevent moisture

build-up.

3.

Caulking

Produktspezifikationen