Kuzco Ridge EC34509 Bedienungsanleitung

Lies die bedienungsanleitung für Kuzco Ridge EC34509 (1 Seiten) kostenlos online; sie gehört zur Kategorie Beleuchtung. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 7 Bewertungen. Hast du eine Frage zu Kuzco Ridge EC34509 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

INSTALLATION SHEET

EC34509

LED Exterior Flush Mount

START FROM HERE

Please Note:

•All Kuzco LED fixtures come with pre-wired LED module(s).

• Unless instructed to do so, please do not touch any part of the LED module(s) as any

unnecessary contact with the module could cause permanent damage.

• For dimming, an ELV (Electronic Low Voltage) type of dimmer is required.

•

Make sure power is completely off at the fuse box.

•

Have your fixture installed by a qualified licensed electrician.

•

Prepare everything in a clear area.

•

Wear gloves at all times during this installation.

•

Read instructions carefully before you start assembly.

•

Keep this instruction sheet for future reference.

Technical Support: 1-855-855-8926

19054 28th Avenue Surrey, BC Canada V3Z 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

20190312

1.

2.

3.

Remove the fixture from its original packaging. Next,

remove the mounting platefrom the canopy (1c) (2a)

un-threading the set screws . Connect all wires (2b)

correctly black to black “L”, white to white “N” and the

ground wire with provided marrettes from the (1b)

hardware package.

Attach the mounting plate to the electrical (1c)

junction box on the ceiling using the two screws (1a)

(1d) provided in the hardware package. Secure the

canopy (2a) to the mounting plate (1c) using set

screws (2b).

You have now completed the installation of your

fixture, enjoy.

1a.

1b.

1d.

2a.

1c.

2b.

Produktspezifikationen