La Crosse Technology 30902 Bedienungsanleitung

Lies die bedienungsanleitung für La Crosse Technology 30902 (128 Seiten) kostenlos online; sie gehört zur Kategorie Synthesizer. Dieses Handbuch wurde von 42 Personen als hilfreich bewertet und erhielt im Schnitt 4.5 Sterne aus 8 Bewertungen. Hast du eine Frage zu La Crosse Technology 30902 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Page 3Page 4Page | 2

0.9” 12 VOLT RED

LED ALARM CLOCK

Model: 30902

DC: 022421

POWER UP

1. Insert the 12V car plug into a 12V car outlet. Optional: Insert one

9 volt battery for backup.

2. 12:00 will flash as an indication to set the time and/or alarm.

TIME SETTING

1. Continuously hold down the TIME button while setting your hour

and minutes.

2. While holding the TIME button, press the HOUR button to set

your hour. Note: The PM indicator will appear when you advance

to PM time.

3. Press the MINUTE button to set your minutes.

4. Release the TIME button when the correct time is shown on the

display.

TIME ALARM

ON HI: Slide the ALARM HI/LO/OFF switch to the HI position to turn

the alarm on at the highest volume (90db). The alarm light indicator will

appear.

ON LO: Slide the ALARM HI/LO/OFF switch to the LO position to turn the

alarm on at a normal volume. The alarm light indicator will appear.

OFF: Slide the ALARM HI/LO/OFF switch to the OFF position to turn the

alarm OFF. The alarm light indicator will disappear.

ALARM ON/OFF & VOLUME

1. Continuously hold down the ALARM button while setting your alarm

time.

2. While holding the ALARM button, press the HOUR button to set your

alarm hour. Note: The PM indicator will appear when you advance to

PM time.

3. Press the MINUTE button to set your alarm minutes.

4. Release the ALARM button when the correct alarm time is shown on the

display.

S N O O ZE

• When alarm sounds, press the SNOOZE button to silence alarm for 8

minutes.

• Snooze function can be repeated many times if desired.

• Always purchase the correct size and grade of battery most suitable for

intended use.

• Clean the battery contacts and also those of your clock prior to battery

installation.

• Ensure the battery is installed with correct polarity (+ and -).

• Remove battery from equipment when it is not used for an extended

period of time.

• Promptly remove an expired battery.

CARE & MAINTENANCE

BATTERY BACKUP

• Insert one “9V” battery into the battery compartment on the back of the

clock. The battery will keep the alarm and time settings until the power

is restored.

• The LED display will not light-up but the alarm will sound at the preset

alarm time.

• If there is no battery installed but the power is interrupted, the display

will flash at 12:00 and the time and alarm need to be set again.

Power:12V power cord. Requires one 9V battery for back-up not included

Dimensions: 1.90”H x 4.55”W x 2.10”D

POWER REQUIREMENTS

HOUR Button

SNOOZE Button

ALARM HI/LO/OFF Switch

MINUTE Button TIME Button ALARM Button

12V CAR PLUG

PM

Light

Indicator

Alarm

Light

Indicator

Time Display

Produktspezifikationen