La Crosse Technology 5131311 Bedienungsanleitung

Lies die bedienungsanleitung für La Crosse Technology 5131311 (2 Seiten) kostenlos online; sie gehört zur Kategorie Uhr. Dieses Handbuch wurde von 18 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 9.5 Bewertungen. Hast du eine Frage zu La Crosse Technology 5131311 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

INTRODUCTION:

The Analog-Digital Atomic Clock features atomic (radio-Style

controlled) time and date, indoor temperature/humidity, week

of . Tap or wave your hand past the motion sensor the year

under LCD to change the . display options

ANALOG-STYLE DIGITAL CLOCK: ATOMIC

SETUP INSTRUCTIONS:

Note: Setup is most eective at night when the WWVB radio-

controlled time/date signal is strongest.

1. Slide the /ON/OFF switch to ON.

2. Remove battery cover from the back of the Analog-Style

Digital Atomic Clock. Slide tab down and pull out to remove

the cover.

3. Insert four NEW AA batteries (not included) into the Analog-

Style Digital Atomic Clock. Observe the correct polarity (see

marking inside the battery compartment).

4. Do not touch buttons for 15 minutes while the clock

searches for the WWVB time signal.

Important:

•Do NOT mix old and new batteries.

•Do Not Mix Alkaline, Standard, Lithium or Rechargeable

Batteries

PROGRAM MENU -BY- STEPSTEP:

STEP 1:

TIME ZONE Hold the /SET button for 2 seconds to enter the

program menu.

Press and release the

+ button to select a dierent Time Zone:

o= Newfoundland NST

o= Atlantic AST

o= Eastern EST

o= Central CST

o= Mountain MST

o Pacic PST=

o AKST= Alaska

o= Hawaiian time zone. HAT

DSAVING TIME INDICATOR AYLIGHT : Press the–button to

select DST. The letters DST will appear in the upper right

corner. Conrm time zone and DST setting with the /SET

button and move to step 2.

STEP 2:

LANGUAGE: EN (English) will ash. Use the + or button to –

select the languag e for the day of the week:

o (English) EN

o DE (German)

o FR (French)

o (Italian) IT

o (Spanish) ES

o (Dutch) NE

o (Russian). RU

Conrm with the /SET button and move to step 3.

STEP 3:

YEAR: The year will ash. Press and release the + or button –

to select the correct year. Conrm with the /SET button and

move to step 4.

STEP 4:

MONTH/DATE: The month and date will ash. Press and

release the + or button to select the correct month and date. –

Hold the button to change the digits quickly. Conrm with the

/SEbutton and move to step 5. T

Note: The Day of the Week will set automatically after the

year, month and date are set.

STEP 5:

TIME: The hours and minutes together. Press and will flash

release the + or button to select the correct time. Hold the –

button to change the digits quickly. Conrm with the /SET

button and move to step 6.

STEP 6:

12/24 HOUR 12H will ash. Press and release the +button to

select 24-hour time.

Note: In 12-hour time, the PM indicator will show during

afternoon hours.

FAHRENHEIT/CELSIUS: Press and release the

- button to

select Fahrenheit of Celsius. Conrm with the /SET button

and exit.

Note: The Analog-Style Digital Atomic Clock will return to

active display after 30 seconds with no buttons pressed. The

clock will reflect whatever adjustments made before it timed

out.

CHANGE DISPLAY MODES: The clock will digitally display

dierent options in the lower portion of the LCD. A simple tap

or wave over the motion sensor on the front of the clock slow

below the LCD change the display. will

•: and release (1 One change of display modeTap

second), or slowly Wave of your hand over the motion

sensor (must be within .75" / 2 cm of sensor) to change the

display one time.

•Repeat the tap or slow wave to change again. The display

will stay on the last change.

•: Display modes

oCalendar (weekday, month, date)

oIndoor temperature / humidity

oweek of the year (Mon-Sun view) Work

oDigital time and weekday

Note: Tap or Wave very , within .75" (2 cm) slowlyfrom motion

sensor to change the display.

Auto-scrolling display:

The clock will default to auto-scrolling through the display

options. When in auto-scroll this symbol will appear in >>>

front of the display.

Turn o the auto-scroll by (3 seconds) or slowly tap and hold

wave over the motion sensor for 3 seconds. The symbol >>>

will disappear and the clock will stay on the current display.

Analog- Style Digital Atomic Clock

with motion sensor that changes display options

Model: 513-1311 | Quick Setup Guide

WAVE TAP

Produktspezifikationen