La Crosse Technology 602-249 Bedienungsanleitung

Lies die bedienungsanleitung für La Crosse Technology 602-249 (2 Seiten) kostenlos online; sie gehört zur Kategorie Radiowecker. Dieses Handbuch wurde von 51 Personen als hilfreich bewertet und erhielt im Schnitt 4.4 Sterne aus 26 Bewertungen. Hast du eine Frage zu La Crosse Technology 602-249 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Page | 2Page | 3Page | 4

1.76” LED ALARM CLOCK

with Dual Alarms and USB Charging

Model: 602-249

DC: 020419

POWER UP

1. Insert the provided Stand into bottom of clock.

2. Insert the 5.0 volt power cord into an outlet, then into your

Alarm Clock.

1. Hold the SET button to enter the Settings Menu.

2. Press the + or DST/- buttons to adjust the values. Hold to

adjust quickly.

3. Press the SET button to confirm and move to the next item.

Settings Menu Order:

• Hours • Minutes

• 12/24 Hour

• Snooze Duration (05 to 60 minutes)

S E T T I N G S

FIND FAQS, AND MORE UNDER THE SUPPORT TAB HERE:

bit.ly/602-249

TIME ALARMS

Stop the Alarm (s) for one day:

• When an alarm sounds the related Alarm Icon will flash.

• Press the AL1.2 button to stop the alarm for one day. The Alarm

Icon will remain solid on the display.

Activate | Deactivate Time Alarms:

• Press the AL1.2 button once to activate Alarm 1. The Alarm 1

Icon will show.

• Press the AL1.2 button a second time to activate Alarm 2. The

Alarm 2 Icon will show.

• Press the AL1.2 button a third time to activate both Alarm 1 and

Alarm 2.

• Press the AL1.2 button a fourth time to deactivate both alarms.

Both the Alarm 1 and Alarm 2 icons will disappear.

Snooze:

• When an alarm sounds, press the AUTO DIM SET button to

silence the alarm for the 5 minutes or the Snooze Duration

selected in the settings menu.

• The Alarm 1 Icon or Alarm 2 Icon will flash.

Note: If the Second Alarm sounds, it will override the Snooze

function on the First Alarm. The First Alarm will sound again the

next day.

1. Hold the AL1∙2 button to enter alarm set mode.

2. Press the + or - buttons to adjust the values. Hold to adjust

values quickly.

3. Press the AL1∙2 button to confirm and move to the next item.

4. Press SET button anytime to exit alarm set mode.

Alarm setting order:

• Alarm 1 Hour

• Alarm 1 Minutes

• Alarm 2 Hour

• Alarm 2 Minutes

Alarm 1 Icon, shows when alarm

is active

Alarm 2 Icon, shows when

alarm is active

5.0 V adapter

(included)

1 CR2032

Lithium Battery

(not included)

!

INSTALL CR2032 BATTERY

Your clock requires one CR2032 lithium battery (not included) to

provide backup power in the event of a temporary power

interruption.

1. Place your unit face down on a flat and soft surface.

2. Use screw driver to open the battery compartment door. Slide

the battery cover down to remove it.

4. Insert one new CR2032 battery into the battery compartment

with the “+” side facing up as indicated.

5. Close the battery compartment door and tighten the battery

door screw.

Produktspezifikationen