La Crosse Technology LTV-TH2I Bedienungsanleitung


Lies die bedienungsanleitung für La Crosse Technology LTV-TH2I (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 29 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 15 Bewertungen. Hast du eine Frage zu La Crosse Technology LTV-TH2I oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/3
Model: LTV-TH2
DC: 083017
Thermo-hygro Sensor
Power & Mounting
LED Light
AA
+-
AA
+-
Battery Cover
Hole for
mounting
TX F/C
∙ Press TX to send a signal
∙ Press F/C to select Fahrenheit
or Celsius display on sensor.
1. Install 2-AA batteries according to polarity and replace battery cover. The blue LED light will flash
when transmitting.
Mounting:
1. Use the hole at the top to hang your sensor from the back using a nail. Or, insert one mounting screw
through the front of your sensor.
2. Mount your sensor on a north-facing wall or in any shaded area. Under an eave or deck rail is
preferred to avoid inaccurate readings from the sun.
3. The maximum wireless transmission range to the weather station is up to 400 feet (121 meters) in open
air, not including walls or floors.
4. Be sure your sensor is mounted vertically, to allow moisture to drain out properly.
Note: Watch sensor mounting video: http://bit.ly/TH_SensorMounting


Produktspezifikationen

Marke: La Crosse Technology
Kategorie: Nicht kategorisiert
Modell: LTV-TH2I

Brauchst du Hilfe?

Wenn Sie Hilfe mit La Crosse Technology LTV-TH2I benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten