La Crosse Technology WT-3122A Bedienungsanleitung

La Crosse Technology Uhr WT-3122A

Lies die bedienungsanleitung für La Crosse Technology WT-3122A (2 Seiten) kostenlos online; sie gehört zur Kategorie Uhr. Dieses Handbuch wurde von 3 Personen als hilfreich bewertet und erhielt im Schnitt 3.9 Sterne aus 2 Bewertungen. Hast du eine Frage zu La Crosse Technology WT-3122A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/2

12.5 Inch Atomic Wall Clock

Model: WT-3122A

DC: 052518

For information about WWVB, atomic time signal visit:

http://bit.ly/AtomicTime

• Always purchase the correct size and grade of battery most

suitable for intended use.

• Clean the battery contacts and also those of your clock prior

to battery installation.

• Ensure the battery is installed with correct polarity (+ and -).

• Remove battery from your clock when it is not used for an

extended period of time.

• Promptly remove an expired battery.

CARE AND MAINTENANCE

Battery Requirements: 1 AA (IEC LR6) required in movement

(Alkaline recommended)

Battery life: 1 battery; over 12 months

SPECIFICATIONS

La Crosse Technology, Ltd. provides a 1-year limited time

warranty (from date of purchase) on this product relating to

manufacturing defects in materials & workmanship.

Before returning a product, please contact our friendly

customer support with questions or visit our online help.

Phone: 1-608-782-1610

Online: www.lacrossetechnology.com/support/

WARRANTY AND SUPPORT

Page | 1Page | 4

WARNING: This product can expose you to chemicals including

styrene, which is known in the State of California to cause cancer.

For more information go to: https://www.p65warnings.ca.gov/

POWER UP

1. Select Time Zone and DST ON or OFF.

2. Insert 1 AA battery into your clock.

3. For best reception, place your clock on a wall that faces

Ft. Collins, Colorado. During the night, your clock will set itself.

IMPORTANT:

• Hands will move to 12:00 and search for the atomic time

signal.

• After 8-10 minutes if no atomic time signal is received, the

clock will start running from 12:00.

• Your clock will continue to search for the WWVB atomic time

signal.

• Allow up to 5 nights for the clock to receive the atomic time

signal.

SET

RESET

WAVE (Atomic search)

Battery

Time Zone Selector

Daylight Saving Time

Selector

Set Time:

1. Hold SET for 3 seconds

2. Press and Hold SET to move hands quickly.

3. Press and release SET to move hands forward step by step.

Reset:

If the clock does not respond when trying to manually set your

time, press the RESET button on the movement case.

MANUALLY SET TIME

• In certain areas, your clock may not be able to receive

the atomic time signal due to signal strength or interference.

• In this case, your clock can be set manually and operate as

a quartz clock until the WWVB signal can be received.

Note: The atomic time signal will override manual settings.

product support, and awesome giveaways.

LET’S BE SOCIAL!

Page | 3Page | 2

Produktspezifikationen

Marke:	La Crosse Technology
Kategorie:	Uhr
Modell:	WT-3122A
Produktfarbe:	Holz
Akku-/Batterietyp:	AA
Typ:	Mechanische Uhr
Anzahl unterstützter Akkus/Batterien:	1
Formfaktor:	Kreis
Durchmesser:	317.5 mm
Unterstützte Positionierung:	Wand