Lancom GS-3528X Bedienungsanleitung

Lies die bedienungsanleitung für Lancom GS-3528X (2 Seiten) kostenlos online; sie gehört zur Kategorie Schalter. Dieses Handbuch wurde von 65 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 5 Bewertungen. Hast du eine Frage zu Lancom GS-3528X oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

TECHNICAL DATA

LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. This docu-

ment contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors and / or omissions. 111901/1121

Hardware

Power supplyInternal power supply unit (110–230 V, 50–60 Hz)

Power consumptionmax. 50 watts

EnvironmentTemperature range 0–40°C; short-term temperature range 0–50°C; humidity 10–90%;

non-condensing

HousingRobust metal housing, 19“ 1U (442 x 44 x 375 mm > W x H x D) with removable mounting

brackets, network connectors on the front

Number of fans1

Interfaces

ETH A12 TP Ethernet ports 10 / 100 / 1000 Mbps

A12 TP Ethernet ports 10 / 100 / 2500 Mbps

A4 SFP/SFP+ ports 1 / 10 Gbps

A28 concurrent Ethernet ports in total

Declaration of Conformity

Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in

compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of

the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc

Package Content

DocumentationQuick Reference Guide (DE/EN), Installation Guide (DE/EN)

Mounting bracketsTwo 19” brackets for rackmounting

Cable1 IEC power cord, 1 serial configuration cable 1.5 m

MOUNTING AND CONNECTING THE DEVICE

e 10 G SFP+ ports

OffPort inactive

BlueLink 10 Gbps

GreenLink 1000 Mbps

a System

System: offDevice switched off

System: greenDevice operational

System: redHardware error

aConfiguration interface (Console)

Connect the configuration interface via the included serial

configuration cable to the serial interface of the device you want to

use for configuring / monitoring the switch.

bTP Ethernet interfaces

Use Ethernet cables to connect the interfaces 1 to 24 to your PC or

a LAN switch.

cSFP+ interfaces

Insert suitable LANCOM SFP modules into the SFP+ interfaces

25 to 28. Choose cables which are compatible with the SFP

modules and connect them as described in the module’s

documen tation.

dPower connector (device back side)

Supply power to the device via the power connector. Please

use the IEC power cable supplied or a country-specific LAN-

COM Power Cord.

LANCOM GS-3528X

Quick Reference Guide

C ud eadylo-r

a bc

4Please observe the following when setting up the device

AThe mains plug of the device must be freely accessible.

AFor devices to be operated on the desktop, please attach the adhesive rubber

footpads.

ADo not rest any objects on top of the device and do not stack multiple devices.

AKeep the ventilation slots on the side of the device clear of obstruction.

AMount the device into a 19” unit in a server cabinet using the provided screws and mounting brackets.

c TP Ethernet ports 10M / 100M / 1G

LEDs switched to Link/Act/Speed mode

OffPort inactive or disabled

GreenLink 1000 Mbps

Green, blinkingData transfer, link 1000 Mbps

OrangeLink < 1000 Mbps

Orange, blinkingData transfer, link < 1000 Mbps

LEDs switched to PoE mode

OffPort inactive or disabled

GreenPort enabled, power supply to connected

device

OrangeHardware error

d TP Ethernet ports 100M / 1G / 2.5G

LEDs switched to Link/Act/Speed mode

OffPort inactive or disabled

GreenLink 2500 Mbps

Green, blinkingData transfer, link 2500 Mbps

OrangeLink < 2500 Mbps

Orange, blinkingData transfer, link < 2500 Mbps

LEDs switched to PoE mode

OffPort inactive or disabled

GreenPort enabled, power supply to connected

device

OrangeHardware error

D

D

D

DD

a bdec

bReset button

~5 sec. pressedDevice restart

7~12 sec. pressedConfiguration reset and device restart

Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!

Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.

Produktspezifikationen