Lantronix ACC-930-074-R Bedienungsanleitung

Lies die bedienungsanleitung für Lantronix ACC-930-074-R (1 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 2 Personen als hilfreich bewertet und erhielt im Schnitt 4.1 Sterne aus 2 Bewertungen. Hast du eine Frage zu Lantronix ACC-930-074-R oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1. Run Lantronix Provisioning Manager.

2. If this is your first time running Lantronix Provisioning Manager, proceed

through the initial setup.

3. Locate your device in the device list and note the device IP address.

4. Access Web Manager by entering the device IP address in the address

bar of a browser. The device’s factory default username is “admin” and fac-

tory default password is the last 8 characters of the Device ID (for devices

manufactured after January 1, 2020) or “PASS” (for all older devices).

5. Assign an IP address in the network settings and perform other configu-

ration.

Please see the EDS-MD product User Guide and Command Reference

for detailed instructions: http://www.lantronix.com/support/downloads

EDS-MD® Medical Device Server Quick Start Guide

For detailed installation instructions, see the Lantronix Provisioning

Manager online help at https://docs.lantronix.com/products/lpm/

1. Download the latest version of Lantronix Provisioning Manager from

https://www.lantronix.com/products/lantronix-provisioning-manager/

2. Install Lantronix Provisioning Manager.

1

INSTALL LANTRONIX PROVISIONING MANAGER

© Lantronix, Inc. 2023. All rights reserved.

Lantronix

and

EDS-MD

are registered trademarks of Lantronix, Inc. in the U.S. and certain other countries.

DeviceInstaller

is a trademark of

Lantronix, Inc. All other trademarks and trade names are the property of their respective owners. Specifications are subject to change without notice. 900-593 Rev E

3

CONFIGURATION

S-MD

If your PC and EDS-MD can be connected to a network with a DHCP server:

1. Connect an Ethernet cable to a port on the switch and to Ethernet Main 1

on the EDS-MD.

2. Power up the unit with the appropriate regional power cord.*

If you are unable to connect the PC and EDS-MD to a network:

1. Use an Ethernet cable to connect the computer directly to Ethernet Main 1

on the EDS-MD.

2. Power up the unit with the appropriate regional power cord.*

If Lantronix Provisioning Manager is unable to discover the EDS-MD:

• Check that the “link” light is on when the RJ45 cable is connected

to the computer and EDS-MD

•In Windows Device Manager, ensure that the Ethernet adapter

for the local connection is installed and working properly

RJ45 CAT5E

Ethernet Cable

Power Cord*

ED

S

2

QUICK CONNECT

CONTACT

Technical Support

For technical support queries, visit

http://www.lantronix.com/support.

Latest Firmware

For the latest firmware downloads, visit

http://www.lantronix.com/support/downloads

IP Address Assignment Tutorial

To view a tutorial on how to assign an IP address, visit

http://www.lantronix.com/support/tutorials

* Power cords sold separately

WHAT’S

IN THE

BOX

RJ45 CAT5E

Ethernet Cable

RJ45 Loopback

Adapter

Mounting

Tabs (2)

Rubber

feet (4)

EDS-MD® Medical Device Server

with Ethernet Port Dust Covers

Quick Start Guide

Produktspezifikationen