Lascar Electronics EL-BT-2 Bedienungsanleitung


Lies die bedienungsanleitung für Lascar Electronics EL-BT-2 (7 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 11 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 6 Bewertungen. Hast du eine Frage zu Lascar Electronics EL-BT-2 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/7
EasyLog Bluetooth
quick start guide
Your data logger will arrive parally charged. For opmum performance, charge it for 24 hours before use unl no
baery symbol is displayed. Please use the USB cable provided.
Baery states
The symbols below show the various baery states:
Baery OK/charged
No symbol displayed
Baery low
Solid
Baery charging
Flashing
Before the data logger can be set up, you must install the EasyLog BT app available on Google Play™.
The sensor will display a reading, but it will not record unl the app is installed and setup is complete.
2 Install Android app available on Google Play
1 Charge your data logger
Open the EasyLog BT app on your Android™ device and follow the on-screen instrucons for connecng your logger.
A Bluetooth connecon is established aer pressing the buon on the logger, then selecng that logger from the
scanned list in the Android™ app. You will be prompted with a Bluetooth pairing request. Enter the default logger
password that is listed on-screen or on the back of the logger.
Connecon status
Wireless connecvity is enabled for two minutes aer pressing the buon on the logger. The
Bluetooth symbol will ash to show connecon is possible. While connected, the Bluetooth logo
will be on solidly. During the setup process there are opons to keep the display and/or Bluetooth
module on at all mes, but this will severely limit the baery life.
3 Set-up the data logger


Produktspezifikationen

Marke: Lascar Electronics
Kategorie: Nicht kategorisiert
Modell: EL-BT-2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lascar Electronics EL-BT-2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten