Lasko CT22520 Bedienungsanleitung


Seiten 8 Heizung

Lies die Bedienungsanleitung für Lasko CT22520 kostenlos online oder lade das PDF herunter. Diese Anleitung wurde 0 Mal aufgerufen. Frage zu diesem Modell? Stelle eine Frage

New 3/26CT22520ES
1
Used for Models:
CT22520
READ AND SAVE THESE INSTRUCTIONS
Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself
and others by observing all safety information. Failure to comply with instructions could result in personal injury
and/or property damage!
This heater is for residential use only. It is not intended to be used in commercial, industrial
or agricultural settings.
Please Do Not Return Product to Store!
Chat with us at www.lasko.com Monday-Friday 8am - 9pm EST
(Valid in U.S. and Canada only)
Halo
™
Ceramic Tower Heater
with Remote Control
Instruction Manual
Register Your Product Today
You will benet from:
•
Efcient and enhanced support
•
Future product updates
This product is equipped with PowerGuard
™
.
PowerGuard
™
monitors the outlet voltage to detect poor
outlet connections that can cause overheating. If an unsafe
condition is detected, the heater will shut o and alert you
to protect the unit and your home.
PowerGuard
™
must be manually enabled. It will
remain active until manually disabled.
How to enable PowerGuard
™
:
•
Plug in and turn the unit on
•
Press and hold the
“
+
”
and buttons for 5 seconds
•
A 5-second countdown will display during the hold duration
•
PowerGuard
™
icon will illuminate on display with an audible
beep, signaling it is enabled*
a.
* Icon will stay illuminated until PowerGuard
™
is disabled
If PowerGuard
™
is enabled and senses an unsafe voltage at the
outlet, the heater will automatically switch into protective state.
When this happens, you will notice the following:
•
The heater will safely shut o
•
PowerGuard
™
icon will blink and unit will beep
•
Display will show an “E1” error message
•
All other display lights turn o, expect the power light
To reset the heater, unplug it from the outlet. If the heater still
doesn’t work, it’s likely it’s caused by a faulty or loose outlet
connection. Try a dierent outlet for optimal performance.
PowerGuard
™
will remain enabled/disabled through a power cycle
How to disable PowerGuard
™
:
•
Make sure unit is on
•
Press and hold the
‘
+
’
and buttons for 5 seconds
•
A 5-second countdown will display during the hold duration
•
PowerGuard
™
icon illumination will turn o with an audible
beep, signaling it is disabled
PowerGuard
™

Bewerten Sie dieses Handbuch


Produktspezifikationen

Marke: Lasko
Kategorie: Heizung
Modell: CT22520

Brauchst du Hilfe?

Wenn Sie Hilfe mit Lasko CT22520 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten