LawnMaster NPTBSP2609A Bedienungsanleitung

LawnMaster Rasenmäher NPTBSP2609A

Lies die bedienungsanleitung für LawnMaster NPTBSP2609A (42 Seiten) kostenlos online; sie gehört zur Kategorie Rasenmäher. Dieses Handbuch wurde von 26 Personen als hilfreich bewertet und erhielt im Schnitt 4.8 Sterne aus 13.5 Bewertungen. Hast du eine Frage zu LawnMaster NPTBSP2609A oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Seite 1/42
SERVICE MANUAL
26cc 2-Cycle Brush Cutter
NPTBSP2609A
Read all safety rules and instructions carefully before servicing this tool.
601 Regent Park Court Greenville, SC 29607, 1-866-384-8432
2
Section Page
CONTENTS
CONTENTS 2
SPECIFICATIONS 3-4
GENERAL SAFETY RULES 5
PARTS AND FEATURES 6-11
WIRING DIAGRAM AND MANAGEMENT 12
GENERAL TROUBLESHOOTING 13-21
AIR & FUEL SYSTEM 22-29
THROTTLE AND STARTER SYSTEM 30-34
NOPULL™ STARTER SYSTEM 35-38
26CC 2-CYCLE ENGINE 39
GEAR HEAD AND BRUSH CUTTER BLADE 40
MANUFACTURER'S WARRANTY AND CONTACT 41
3
SPECIFICATIONS
TORQUE SPECIFICATIONS
Engine Size 2-Stroke / Full Crank
Engine Displacement Claimed / Rated 26cc / 25.4cm
3
Ignition Capacitor Discharge Ignition (CDI)
Carburetor All Position Diaphragm Type With Primer Bulb
Air Filter Foam (Dry)
Engine Shut Off Auto-Reset
Throttle Control Variable Speed Trigger
Fuel / Oil Ratio 40 : 1
Fuel Tank Capacity 400 ml
Spark Plug Champion RCJ6Y
Rotor Air Gap 0.012-0.015 (0.30-0.40 mm)
Spark Plug Gap 0.026 (0.65 mm)
Run Time on Full Tank 30 Minutes
UNIT SPECIFICATIONS
Engine
Fuel System
General
Application Description Torque Torque
(IN.LBS) (N.m)
Crankcase Apply a thermostable screw-thread glue onto the 4
screws (M5X30) and then x the crankcase cover. 53-62 6-7
Cylinder to crankcase
Apply a thermostable screw-thread glue onto the 4
screws (M5X20) and then tighten the screws securing
the cylinder to crankcase.
53-62 6-7
Spark plug to cylinder Pre-screw the spark plug to the cylinder, and then
tighten with a torque spanner. 115-137 13-15.5
Carburetor mount to
cylinder
Apply a thermostable screw-thread glue onto the 2
screws (M5X20) and tighten the screws securing the
carburetor mount to the cylinder.
35-44 4-5


Produktspezifikationen

Marke: LawnMaster
Kategorie: Rasenmäher
Modell: NPTBSP2609A

Brauchst du Hilfe?

Wenn Sie Hilfe mit LawnMaster NPTBSP2609A benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten