Lazer Urbanize Bedienungsanleitung

Lazer Fahrradzubehör Urbanize

Lies die bedienungsanleitung für Lazer Urbanize (6 Seiten) kostenlos online; sie gehört zur Kategorie Fahrradzubehör. Dieses Handbuch wurde von 4 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 2.5 Bewertungen. Hast du eine Frage zu Lazer Urbanize oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Download PDF

Seite 1/6

1. How to use the rechargeable rear LED light

For a video guide to help with the following steps please

go to the following URL and click on how to videos:

www.youtube.com/user/LazerSport

URBANIZE

This LED complies with Part 15 of

the FCC Rules. Operation is subject

to the following two conditions: (1)

This device may not cause harmful

interference, and (2) this device must

accept any interference received,

including interference that may cause

undesired operation.

The Lazer Urbanize comes with a

rechargeable rear LED light which is

designed to t perfectly in the rear

of the helmet.

1) To install in the helmet, simply align

the LED light with the rear hole. First

push the top in and then the bottom

as shown in diagram 1A.

2) To turn the light on, simply short

press the logo on the front of the light.

To cycle between the light modes short

press the same button. To turn of the

light cycle through all light modes until

the light is o.

Light modes:

1. Constant

Run time 8 hours

2. Flashing

Run time 26 hours

3. Pulsing

Run time 10 hours

4. O

1- STILL MODE

2 - FLASHING MODE #1

3 - FLASHING MODE #2

4 - FLASHING MODE #3

5 - OFF

battery

battery insulator

battery

1- STILL MODE

2 - FLASHING MODE #1

3 - FLASHING MODE #2

4 - FLASHING MODE #3

5 - OFF

battery

battery insulator

battery

1- STILL MODE

2 - FLASHING MODE #1

3 - FLASHING MODE #2

4 - FLASHING MODE #3

5 - OFF

battery

battery insulator

battery

1- STILL MODE

2 - FLASHING MODE #1

3 - FLASHING MODE #2

4 - FLASHING MODE #3

5 - OFF

battery

battery insulator

battery

1A)

2. How to recharge the rear LED light

The LED light in the Lazer Urbanize

will need to be charged before use.

After approximately 8 hours of use

on constant mode you will need to

recharge your battery.

To do this you will need to remove

it from the helmet.

1. Reach into the helmet, push the

head basket away slightly and push

the light out of the back of the helmet

as shown in diagram 2A.

3. Now using the cable provided,

plug the battery in to a standard 5V

USB power source (smartphone

charger, computer USB port) of a

renowned manufacturer. Charge for

approximately 2 hours to fully charge

the light. During charging time, the

battery signal led will turn solid red and

when it is 100% charged, the charging

LED will go out. Feel free to charge

it up at work while your helmet is

safely locked to you bike using

the lock hole.

URBANIZE

2A)

Produktspezifikationen

Marke:	Lazer
Kategorie:	Fahrradzubehör
Modell:	Urbanize
Gewicht:	360 g
Färbung:	Abbildung
Menge pro Packung:	1 Stück(e)
Bauart:	Formenbau
Geschlecht:	Unisex
Belüftung:	Ja
Oberflächentyp:	Matt
Verschlussart:	Fidlock magnetische Schnalle
Zielgruppe:	Erwachsener
Produkthauptfarbe:	Titan
Winddicht:	Ja
Anzahl der Belüftungslöcher:	6
Bereich Kopfumfang:	52 - 56 cm
Helmtyp:	Halber Helm
Sport-Kopfbekleidung Typ:	Helm
Integrierte LED-Beleuchtung:	Ja
Schutzbrille enthalten:	Ja
Spezifische Eigenschaften Schutzmarken:	MIPS