Leica Lino ML180 Bedienungsanleitung
Leica
Entfernungsmesser
Lino ML180
Lies die bedienungsanleitung für Leica Lino ML180 (28 Seiten) kostenlos online; sie gehört zur Kategorie Entfernungsmesser. Dieses Handbuch wurde von 32 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 16.5 Bewertungen. Hast du eine Frage zu Leica Lino ML180 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage
Seite 1/28
Leica Lino
ML90, ML180
EN
1Start up
Leica Lino ML series 785880c en
User Manual
Version 785880b
English
Congratulations on your purchase of the Leica Lino
ML Series.
Before starting up the instrument
for the first time, please read
through the entire User Manual
paying special attention to the
section "Safety instructions".
Contents
Start up..................................................................1
Interface ................................................................ 4
Operation .............................................................. 5
Working with receivers ...........................................9
Checking the accuracy..........................................16
Technical data......................................................19
Care and transport ............................................... 21
Safety instructions ...............................................23
Warranty .............................................................. 27
Start up
Inserting / replacing batteries
1 Lino ML90/180: Turn the release screw on the
battery compartment a 1/4 turn (clock wise) with
the help of a coin or a flat head screw driver to
unlock the battery compartment.
2 Open the battery compartment cover and insert
the batteries, observing the correct polarity.
XCR Catch:
RVL100:Lino ML90/180:
EN
2
Start up Leica Lino ML series 785880c en
3 Insert the battery compartment cover on the
bottom side first and then insert the compart-
ment completely until it is fully closed.
4 Then lock the compartment by turning the release
screw a 1/4 turn (counter clock wise).
The battery symbol 6 lights up when the
battery voltage is too low. Replace the batteries as
soon as possible.
• Insert the batteries observing the correct polarity
• Use alkaline batteries or rechargeable batteries
only.
• Remove the batteries if the instrument is not to
be used for a long period of time (to prevent
corrosion).
Charging the rechargeable battery
pack / first-time use
• In case that your Lino ML is equipped with a
rechargeable battery pack you can recharge the
battery pack with the supplied Lino ML charger
(Art Nr. 784967) by connecting the charger to the
jack on the battery door.
• The battery must be charged prior to first use
because it is delivered with as low an energy
content as possible.
• A full charging cycle takes 8 hours and the
charging will automaticly stop after a full cycle.
Each time the charger is connected to the unit a
charging cycle will be initiated. See also battery
status indications on the interface in section
"Interface" on page 4.
• The permissible temperature range for charging is
between 0°C and +40°C/+32°F and +104°F. For
optimal charging we recommend charging the
batteries at a low ambient temperature of +10°C
to +20°C/+50°F to +68°F if possible.
• It is normal for the battery to become warm
during charging.
Produktspezifikationen
| Marke: | Leica |
| Kategorie: | Entfernungsmesser |
| Modell: | Lino ML180 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Leica Lino ML180 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Entfernungsmesser Leica
14 Oktober 2024
5 Oktober 2024
12 September 2024
31 August 2024
27 Juli 2024
27 Juli 2024
27 Juli 2024
26 Juli 2024
25 Juli 2024
24 Juli 2024
Bedienungsanleitung Entfernungsmesser
- Stabila
- Cotech
- Extech
- Kress
- Velleman
- Fieldmann
- Vonroc
- Tripp Lite
- Chauvin Arnoux
- PeakTech
- Callaway
- Dörr
- Stanley
- Skil
- Leupold
Neueste Bedienungsanleitung für -Kategorien-
15 Juni 2025
15 Juni 2025
15 Juni 2025
4 Dezember 2024
3 Dezember 2024
3 Dezember 2024
3 Dezember 2024
18 September 2024
4 September 2024
29 August 2024