LevelOne FEU-0511 Bedienungsanleitung

Lies die bedienungsanleitung für LevelOne FEU-0511 (3 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 30 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 4 Bewertungen. Hast du eine Frage zu LevelOne FEU-0511 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

1

Brief introduction









Many thanks for purchasing Fast Ethernet Switch! This

product supports IEEE802.3U/100Base-/ protocol, as TxFx

well as full duplex and half duplex mode. It provides 4 TX

ports and a UPLINK port, which can suit for most 10/100M

networks. This manual is for 100M converts. Terhe

following purchasing guide is for your reference.

Purchasing guide for optical media converters

Model

Specications

4 x UTP- MM

10/100M adaptive,

multi mode up to 2km, ST/SC/FC

4 x UTP- SM

10/100M adaptive,

single mode up to 100km, ST//FC SC







Packing list

Please check the following items in the package before

installing the converter.

Fast Ethernet Switch 1 piece

AC/DC adapter 1 piece

User manual 1 copy

Please contact the dealer immediately for any missing or

damaged items.







 Interface

RJ-45 interface

The transmission media CAT5 twisted-pair with isa

maximum length of 100 meters. It features auto -negotiation

of straight through line and crossover cables.

Fiber interface

The or ST ber interface is of duplex type, namely TX SC

and RX. When the two sets of optical converter are

interfaced or connected to switch with ber interface, the

ber is in cross connection, namely "TX-RX", "RX-TX"

(direct butting for single optical fiber).

2. nnection Co

Connect the network device (work station, hub or switch) to

the -45 jack of the optical converter through twisted-pair RJ

CAT5. Connect the multi-mode/single mode ber to SC/ST

ber interface of the optical converter. Turn the power on.

The corresponding LED is on for correct connection. (See a

the table below for the LED indicator lamp)

Fig.1 Basic Network Connection

Panel

1.Front

2.Back







Explanation for LED indicator lamp

The LED indicator lamps serve as device monitoring and

error display. The following explains each LED indicator.

LED

Status

Explanation

P WR

Green

Lit when Power is available.

L/A

Green

Lit when there is/are network device(s)

connect the corresponding port(s)

Blink

Blink when the corresponding ports

is(are) transmitting data ows

Produktspezifikationen