LevelOne KVM-9036 Bedienungsanleitung

Lies die bedienungsanleitung für LevelOne KVM-9036 (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 55 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 8 Bewertungen. Hast du eine Frage zu LevelOne KVM-9036 oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

KVM-9036 CAT5 USB KVM Extender

CAT5 USB KVM Extender

Transmitter (Tx) Unit x 1

Receiver (Rx) Unit x 1

USB Cable x 2KVM

Power Adapters (DC5V) x 2

This Quick Installation Guide x 1

Transmitter Unit (Local End Connection) )

[Tx Front-panel]–

a.Power LED (Lights when power on)is

b.Link LED (Lights when link on)is

c.USB keyboard connector

d.USB mouse connector

e.Select Button for Receiver Mode (View Only/Full

Access/Access Deny)

f.Video LED (Lights when Remote Console monitor is on)

g.Control LED (Lights when Remote Console on)is

[Tx Back panel]–

h.Power jack (DC5V, center-positive)

i.

CAT5 Extension Port [RJ-4connect 5, to the Receiver Unit

viaa CATx UTP cable, 100Mmax.]eter

j.Computer port [HDB-15(VGA), connect to the (Local)

computer using a special 3-in-1 KVM Combo-free cable]

Upgrade port (USB Type dedicated for rmware upgradeB,

use)

Receiver Unit (Remote End Connection)

[Rx-front panel]

1.Power LED (Lights when power on)is

2.Link LED (Lights when link on)is

3.USB keyboard connector

4.USB mouse connector

5.Toggle Button for Local / Remote Computers

6.Local Computer LED (Lights when Local computer active)

7.

Remote Computer LED (Lights when Remote computer active)

[RX-back-panel]

8.Power jack (DC5V, center-positive)

9.

CAT5 Extension Port [RJ-4connect 5, to the (Remote)

computer via a CATx UTP cable, 100 Meter max

10.Computer port [HDB-15(VGA), connect the (Local)to

computer using a special 3-in-1 Combo-free cable]KVM

11.Upgrade Port (USB Type dedicated for firmware upgradeB,

use)

12.Console Video port [HDB-15(VGA), connect monitor]to

OSD Main Menu

On theReceiverUnit,theOSD(on-screendisplay)Menu

control available isto facilitate more intuitive operations. Users

can congure various settings by the OSD Menu:

OSD Menu

To navigate the OSD Menu, just use the following keys

Esc: Exit,

→Left/Right cursor: change value the menu optionin

Up/Down Cursor: Navigate.

F10: Logout the OSD Menu (However, the password if

protection isnot enabled, the Logout feature will not be

available)

Hotkey sequence = [Scroll Lock]+ [Scroll Lock]+ H +(y)** *

(y) = CAPS, F12 NUMor

⚫ Note that the hotkey preceding sequence setting the on

Receiver Console will not aect the hotkey preceding

sequence on the Transmitter Console, which will always

allow Scroll Lock + Scroll Lock preceding hotkey. asIn

addition using the hotkey command and can also use the to

OSD menu change the hotkey preceding sequence.to

Please refer the previous section.to

Auto logout: [0 ~ 10]

Disable / Enable the Logout timeout (0~10min, 0 = Disable).

The Auto logout time can congured from 0 (Disable), right beup

to Min. 10If the password protection not enabled, the Auto is

logout will not beput into function.

Hotkey: [Scroll Lock (Default)]

To change

the preceding sequence hotkey pressby, →to select

the CAPS, F12 or NUM.

OSD Timeout: [0~60]

Congured the OSD timeout value, start at seconds, with 20an

increment 5 ofup seconds (0~60 seconds, 0 = Disable).to60

O Shared Console

Congured the Console Control [(Disable/Enable the timeout value

(0~30 seconds, 0= Disable)]

Note:Local Remoteswitching engagedpriorityoffers and

“Deadlock Function, the deadlock function protect while al”toone

us

er (either one) was using, the other user have wait until the to

rst user released the process, then the other user can start to use.

When the deadlock active, the isTransmitter’s LED “Video” &

“Control” ashing, until the user released the process control.is

⚫ The blue component color adjusted automatically isasin

proportion the red and green. Users need adjust todonoto

⚫

themselves.

In order achieve optimized video output toon the console

that may 100MMeters away from the computer, users be

could adjust these various parameters conscientiously to

achieve anon optimized video output the console monitor.

For a general guideline how adjust your video display of to

parameters the remote console, please refer next on to

section, Optimize the Video Display the Remote Console.on

Load Default Settings

Load the factory default settings.

FCC / CE Statements

FCC Statement: This equipment has been tested and found to

comply with the regulations for a Class B digital device, pursuant to

Part 15of the FCC Rules. These limits are designed provide to

reasonableprotectionagainstharmfulinterferencewhenthe

equipmentoperateda is in commercialenvironment.This

equipment generates, uses,andcan radiateradio frequency

energy and, ifnot installed and used accordance with this Quick in

InstallationGuide,may causeharmfulinterferenceradio to

communications. Operation this equipment a residential area ofin

is likely cause harmful interference which case, the user will toin

be required correct the interference toat his/her own expense.

CE Statement: This a Class B product a domestic isin

environment, this product may cause radio interference, which in

case the user may required take adequate measures.beto

Deutsch

Installationsschema.

Français

Schéma d'installation.

Español

Diagrama de instalación.

Italiano

Diagramma di installazione.

Português

Diagrama de instalação

English

Installationdiagram

Produktspezifikationen