Lewitt Interviewer Bedienungsanleitung

Lies die bedienungsanleitung für Lewitt Interviewer (2 Seiten) kostenlos online; sie gehört zur Kategorie Mikrofon. Dieses Handbuch wurde von 24 Personen als hilfreich bewertet und erhielt im Schnitt 4.0 Sterne aus 2 Bewertungen. Hast du eine Frage zu Lewitt Interviewer oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

// INTERVIEWER

QUICKSTART GUIDE

LEWITT

®

Burggasse 79

1070 Vienna

Austria

www.lewitt-audio.com

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

// Getting started

1Connect your INTERVIEWER to your mobile recorder, wireless transmitter,

camera with XLR input or audio interface.

2To connect the microphone directly to your 3.5mm camera audio input, use the

supplied adapter.

3Set the input gain on your recording device/camera.

4Use the supplied windshield if necessary.

5If branding is required, use the supplied microphone fl ag.

6Please note: The microphone does not need to be moved back and forth during

the interview (omni pattern). Just hold the microphone still around chest height

(Fig.1). This way, you have no microphone in the face area without loss in sound

quality. Speaking into the microphone from a closer distance might be

necessary in very loud and noisy environments.

// Overview

// Dynamic microphone for reports, podcasts and interviews

//High clarity and best in class speech intelligibility

// Omnidirectional polar pattern picks up sound from every direction equally

// Whisper Coating to reduce handling noise to a minimum

// Integrated acoustic pop and windshield

// No irritating microphone in the face area while fi lming

// Direct connectivity to your camera using the supplied adapter

// Gold plated & corrosion-resistant 3-pin XLR output connector

// Solid full-metal, die-cast body

// Scope of Supply

// INTERVIEWER, reporter microphone with omnidirectional capsule

//Camera adapter (XLR-Female to 3.5mm phone connector)

// Windshield

// Microphone fl ag - customizable

// DTP 50 Lb, transport bag

// Microphone Flag

The microphone fl ag can be screen printed with your logo or graphic. You can also apply a weatherproof label with the following

dimensions: 66x39mm. You can download a template here: www.lewitt-audio.com/download/interviewer-microphone-fl ag

// Please Note

//If your INTERVIEWER is not in use, store it in a dry place preferably the supplied DTP 50 Lb transport bag.

//When disconnecting the microphone cable, grasp the connector and do not pull the cable.

// Do not attempt to modify or fix the microphone, as it would void your product warranty.

// The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning.

STURDY

AND STYLISH

WIRED HANDHELD DYNAMIC MICROPHONE

WITH OMNIDIRECTIONAL POLAR PATTERN

Fig. 1 - Microphone placement

Produktspezifikationen