LiftMaster 380UT Bedienungsanleitung

Lies die bedienungsanleitung für LiftMaster 380UT (2 Seiten) kostenlos online; sie gehört zur Kategorie Nicht kategorisiert. Dieses Handbuch wurde von 62 Personen als hilfreich bewertet und erhielt im Schnitt 5.0 Sterne aus 31.5 Bewertungen. Hast du eine Frage zu LiftMaster 380UT oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

Yourremotecontrol can beprogrammed to operateup to two devices,such asagaragedooropener,gate

operator,or commercial dooroperator and hasaSMART/LEARNbutton.Each button on theremotecontrol

worksindependentlyoftheotherand must be programmed separately. The images throughoutthismanual arefor

reference only and yourproduct may look different.

STOP

Readinstructions thoroughly BEFORE beginning.If you areusing thisproductwith residential door

openers,thisproductmustbeusedonlywith dooropenersmanufactured starting January1,1993

that use photoelectric sensorslocatednearthe bottomof thedoortrack.

WARNING: This productcanexposeyoutochemicals includinglead,whichare knowntothe StateofCalifornia

tocausecancer or birthdefectsorotherreproductive harm. Formore informationgoto

www.P65Warnings.ca.gov

To preventpossibleSERIOUSINJURYorDEATH:

•NEVERallowsmall children nearbatteries.

•Ifbattery is swallowed, immediately notifydoctor.

To reduceriskof fire,explosion orchemical burn:

•ReplaceONLYwith 3V CR2032 coin batteries.

•DONOT recharge, disassemble, heatabove212°F(100°C)orincinerate.

PROGRAMMING

PROGRAMTO GARAGEDOOR OPENERS WITH A YELLOW LEARN BUTTON

Ifyour remote was previously programmedtoanother type ofopener,seePROGRAM TOCOMPATIBLEGARAGEDOOR

OPENERSAND OPERATORS to reprogramto a yellowLEARN button.

1.Startwith thegaragedoor closed.

2.Pressand immediatelyrelease the yellow LEARNbutton.TheLearn LEDglows steadyfor30 seconds.

Within 30 seconds...

3.Pressand hold the button on the remotecontrol you wish to use.

4.Releasethe button when the garagedooropenerlightsblink ortwo clicksare heard.

5.Testbypressing the button you justprogrammed.Theopeneractivates.

To program theremoteto Chamberlain accessories,refertothemanual provided with theaccessory.

Yellow

LEARN

Button

PROGRAMTOCOMPATIBLE GARAGE DOOROPENERSANDOPERATORS

1.Startwith yourgarage door,gate,orcommercial door closed.

2.Removetheremote control cover.Pressand hold theprogram button until theLEDturns on.

3.Pressand release the SMART/LEARNbutton on yourproductormatch theremotecontrol DIPSWITCHES

to theexisting receiverorexisting remotecontrol.

4.Selectabutton to program on theremotecontrol.Pressand release the button thespecified numberof

timesaccording to thefollowing list.NOTE: MakesuretheLEDstopsflashing between each pressof the

button. Thegaragedooropenerwill respond byclicking,blinking oractivating.

... 8times Chamberlain®* YellowButton 2011-Current

... 3times Chamberlain®* PurpleButton 2005-Current

... 2times Chamberlain®* OrangeButton 1997-2005

... 4times Chamberlain®* Green Button 1993-1996

... 6times GenieOverhead Door®Intellicode 1995-Current

... 5times GenieOverhead Door®** Intellicode 2005-Current

... 1time Linear®Mega-Code 1997-Current

... 7times Stanely®Security Code 1998

... 9times Wayne Dalton®Rolling Code372.5 MHz 1999-Current

... 14times Linear Multicode®10 Position Dip Switch

... 16times Stanley Multicode®10 Position Dip Switch

... 18times Linear®8 Position Dip Switch

... 10times Xtreme Garage®, Guardian®BlackButton 2005-Current

... 11times Sommer®BlackButton 1998-Current

*LiftMaster, Do-It,MasterMechanic, Raynor, TrueValue andSears Craftsmanare

compatiblewith Chamberlain technology.

**FindGenieIntellicode IIinstructions atsupport.chamberlaingroup.com.

5.Presstheprogram button on theremotecontrol to save.

6.Testbypressing the button you justprogrammed.Theopeneractivates.

To program theremoteto Chamberlain accessories,refertothemanual provided with theaccessory.

LED

Program

Button

Cover

LEARN

XMITTER

CONTROL BOARD

RADIO

BUTTON

LOGIC BOARD

SMART/LEARN

BUTTON

RECEIVERREMOTEDIP SWITCHES

•TheSMART/LEARNbutton orDIPSWITCHES are located eitheron theproductorin an external receiveron

ornearthe product. Consult yourproduct owner’s manualtolocatethe SMART/LEARNbuttonor

DIPSWITCHES.

•If you havea2 position DIPSWITCH and programming fails,reverse DIPSWITCHES (OFF to ONand

ONtoOFF).

BATTERY

To preventpossibleSERIOUSINJURYorDEATH:

•NEVERallowsmall children nearbatteries.

•Ifbattery is swallowed,immediately notifydoctor.

To reduceriskof fire,explosion orchemical burn:

•ReplaceONLYwith 3V CR2032 coinbatteries.

•DONOT recharge, disassemble, heatabove212°F(100°C)orincinerate.

Battery

Dispose of old batteries properly

Replace ONLY with 3V CR2032

coin batteries.

NOTICE:This device complies with part15 oftheFCCrules and Innovation, Science and Economic DevelopmentCanada license-exempt

RSSs. Operation is subjectto the following two conditions: (1) this device maynotcause harmful interference, and (2)this device must

accept anyinterferencereceived,includinginterferencethat maycauseundesiredoperation.Anychangesormodificationsnot

expresslyapproved by theparty responsiblefor compliancecould void the user’s authoritytooperate theequipment.

Thisdevicehasbeentestedandfoundto complywith thelimitsforaClass B digitaldevice,pursuantto part 15of theFCC rulesand

IndustryCanada ICESstandard.These limits are designedtoprovide reasonable protection against harmfulinterference ina residential

installation. Thisequipment generates, uses and can radiate radio frequencyenergy and, if notinstalled and used in accordance with the

instructions,may cause harmful interference toradiocommunications.However,there is noguaranteethatinterference will notoccur in

aparticularinstallation.If thisequipmentdoescauseharmfulinterferenceto radioortelevisionreception,which canbedetermined by

turningtheequipment off andon,theuserisencouragedto tryto correct theinterferencebyoneormoreofthefollowingmeasures:

•Reorient or relocatethe receiving antenna.

•Increasethe separationbetween the equipment andreceiver.

•Connect theequipmentintoan outletonacircuitdifferent from that to whichthereceiverisconnected.

•Consultthe dealer or an experienced radio/TVtechnician for help.

LiftMaster.com

Chamberlainand LiftMaster are Trademarks ofChamberlain Group. Genieis a Trademark ofOverhead Door Corporation.Overhead Dooris a Trademark ofOverhead Door Corporation.Linear is a Trademark ofLinear Corporation.Master Mechanic is a Trademark ofTruServ. Sears is a

Trademark of Sears &Roebuck. Stanley is a Trademark of The Stanley Works.Wayne Daltonis a trademark ofWayne DaltonCorporation. DoItis a trademark of DoItBestCorporation.L.L.C.Sommer is a trademark ofSommer Antriebs-und Funktechnik GmbH. Xtreme Garage is a

trademark of Menard,Inc. Guardianis a Trademark ofADHGuardianUSALLC.

© 2020, LiftMaster

All Rights Reserved

114-5463-000B

UNIVERSAL REMOTE CONTROL

Model 380UT

Produktspezifikationen