LiftMaster 877LM Bedienungsanleitung

Lies die bedienungsanleitung für LiftMaster 877LM (4 Seiten) kostenlos online; sie gehört zur Kategorie Fernauser. Dieses Handbuch wurde von 16 Personen als hilfreich bewertet und erhielt im Schnitt 4.7 Sterne aus 8.5 Bewertungen. Hast du eine Frage zu LiftMaster 877LM oder möchtest du andere Nutzer dieses Produkts befragen? Stelle eine Frage

CHANGE AN EXISTING PIN

1

? ? ? ?

Press the programmed PIN

that you want to change.

...the light bulb

blinks twice.

2

Press and hold the

# button until...

3

+

? ? ? ?

new PIN

Enter the new 4-digit PIN of your choice,

then press the ENTER button.

4

To test, press the new PIN,

then the ENTER button.

The garage door opener

will activate.

The light bulb will blink once.

2

Enter a 4-digit

personal

identification

number (PIN)

of your choice:

3

4

1

Locate the

Learn button

on the garage

door opener.

? ? ? ?

Press and hold the ENTER

button until...

...the light bulb blinks.

Press and

release the

Learn button.

The LED will light.

Within 30 seconds...

PROGRAM INITIAL PIN - using a multi-function door control*

PROGRAM INITIAL PIN - using the Learn button

Press the LEARN button again,

the LED will flash once.

Press the LEARN button on the door

control to enter Programming

Mode.

The command

LED will flash once.

The command

LED will flash

once again.

Enter a 4-digit

personal

identification

number (PIN)

of your choice:

? ? ? ?

4

..the light bulb blinks.

Press and hold the ENTER button until...

To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:

• Install Keyless Entry Control within sight of the garage door, out of reach of children at a minimum height of 5 feet (1.5 m), and

away from ALL moving parts of door.

• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote controls.

• Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.

• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.

To test, press the PIN, then press the ENTER button. The garage door opener will activate. To program the Keyless Entry to more than one garage door opener, repeat the steps above using a new PIN

for each additional garage door opener.

*Optional accessory

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer or birth defects or other reproductive harm. For more information go to

www.P65Warnings.ca.gov

WIRELESS KEYLESS ENTRY • MODEL 877LM

For use with Security+ 2.0™ Garage Door Openers. All Security+

2.0™ Garage Door Openers have a yellow Learn button and two

yellow antennas. Refer to your product owner's manual for additional

programming instructions if necessary. The product will activate

when the 4-digit Personal Identification Number (PIN) and ENTER

button are pressed on the Keyless Entry.

Install the battery and program the Keyless Entry prior to

installation. Make sure the garage door opener has a working light

bulb because it is a programming indicator.

Produktspezifikationen